Electrochemical Responses and Microbial Community Shift of Electroactive Biofilm to Acidity Stress in Microbial Fuel Cells
Open Access
Abstract
Microbial community changes in response to acid stress in microbial fuel cells (MFCs) were studied. Acid mine drainage (AMD) wastewater is usually difficult to treat because of the high concentration of sulfate and heavy metals. MFCs, which have multiple functions based on the principle of synergistically treating organic and heavy metal wastewater while generating electrical energy, represent a promising direction for the development of new heavy metal wastewater treatment technologies. Maintaining a neutral or slightly alkaline wastewater pH in MFCs facilitates the growth of electricity-producing microorganisms in the anode chamber. Studies on the response of anode electroactive biofilms to acidic pH stress and its correlation with changes in AMD treatment capacity have not been reported. Results showed that the anolyte pH of 4.0 and 5.0 affected the electron output capacity of the electrogenic microbial community in the MFCs. In contrast, MFCs working at an anolyte pH of 6.0 exhibited a high efficiency of chemical energy conversion to electrical energy. The microbial abundance and microbial diversity of the electroactive biofilm were significantly affected by the H+ concentration in the medium when the ambient acidity was continuously reduced. The classic exoelectrogen Geobacter decreased gradually with the increase of H+ concentration in the medium. In addition, Cu2+ was recovered from the simulated AMD in the MFCs cathodic chambers at low anode pH, but the removal rate of Cu2+ decreased as the pH of the anode environment decreased. At 48 h, 86.2% of Cu2+ was removed from the MFCs cathode solution at pH 5.0, while the removal rate of Cu2+ from the MFCs cathode solution at pH 4.0 was 84.2%. Trace amounts of Cu2O and Cu3(OH)2[CO3]2 were present on the cathode, which reduced the amount of Cu2+ that precipitated on the cathode carbon cloth. Conversely, the concentration of Cu2+ in the catholyte of MFCs with electroactive biofilm at pH 6.0 decreased rapidly, and by 36 h, no detectable Cu2+ was present in the cathodic solution. This study will provide researchers with valuable information regarding the optimal pH for resource recovery with MFCs.Keywords
Funding Information
- National Natural Science Foundation of China (51934009, 52074353, 2019YFC1803600, 2021JJ30855)
- National Key Research and Development Program of China (51934009, 52074353, 2019YFC1803600, 2021JJ30855)
- Natural Science Foundation of Hunan Province (51934009, 52074353, 2019YFC1803600, 2021JJ30855)
This publication has 53 references indexed in Scilit:
- Bioelectrochemical recovery of Cu, Pb, Cd, and Zn from dilute solutionsJournal of Hazardous Materials, 2012
- Reducing the Effects of PCR Amplification and Sequencing Artifacts on 16S rRNA-Based StudiesPLOS ONE, 2011
- FLASH: fast length adjustment of short reads to improve genome assembliesBioinformatics, 2011
- Electrocatalytic activity of anodic biofilm responses to pH changes in microbial fuel cellsBioresource Technology, 2011
- UCHIME improves sensitivity and speed of chimera detectionBioinformatics, 2011
- Exoelectrogenic bacteria that power microbial fuel cellsNature Reviews Microbiology, 2009
- Naïve Bayesian Classifier for Rapid Assignment of rRNA Sequences into the New Bacterial TaxonomyApplied and Environmental Microbiology, 2007
- Microbial Fuel Cells: Methodology and TechnologyEnvironmental Science & Technology, 2006
- Extracellular electron transfer via microbial nanowiresNature, 2005
- Acid mine drainage remediation options: a reviewScience of The Total Environment, 2005