Adaptive digital gate control for series connected IGBTs
Authors:
- 1 November 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 394-399
Abstract
In high power application, series connection of insulated gate bipolar transistors (IGBTs) can increase their voltage handling capability. As to the serial IGBTs, the key issue is to ensure both dynamic and static voltage sharing among serial IGBTs. For the differences of IGBT's characteristics, even the same gate driver could not ensure voltage balance between serial IGBTs. In order to achieve the voltage sharing, the adaptive digital gate control (ADGC) is proposed in this paper. In the proposed adaptive digital gate control, the turn-on di/dt and turn-off dv/dt are digitally sampled and fed back to the control unit, FPGA. The FPGA chooses the suitable gate drive parameters to make the serial IGBTs' switching processes synchronized. The FPGA compares switching speeds of serial IGBTs and determines suitable drive parameters for each serial IGBT. Thus, the serial IGBTs' switching processes can be synchronized and the voltage sharing is achieved. Essentially, it is an optimization of IGBT's switching process, increasing its drive reliability. Experimental results validate the feasibility of the proposed adaptive digital gate control method.Keywords
This publication has 12 references indexed in Scilit:
- Advanced Gate Drive Unit With Closed-Loop $di_{{C}}/dt$ ControlIEEE Transactions on Power Electronics, 2013
- IGBT series connection under Active Voltage Control with temporary clamp2012
- Adaptive digital drive for high power and voltage IGBT in multi-MW wind power converter2012
- An Experimentally Verified Active Gate Control Method for the Series Connection of IGBT/DiodesIEEE Transactions on Power Electronics, 2012
- Series Connection of Insulated Gate Bipolar Transistors (IGBTs)IEEE Transactions on Power Electronics, 2011
- Overview of Multi-MW Wind Turbines and Wind ParksIEEE Transactions on Industrial Electronics, 2011
- Voltage balancing control and experiments of a novel modular multilevel converter2010
- A Space Vector Modulation Strategy for a Back-to-Back Five-Level HVDC Converter SystemIEEE Transactions on Industrial Electronics, 2008
- Considerations for a Digital Gate Unit in high power applications2008 IEEE Power Electronics Specialists Conference, 2008
- Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage DrivesIEEE Transactions on Industrial Electronics, 2007