Effect of Promoters on Steam Reforming of Toluene over a Ni-Based Catalyst Supported on Coal Gangue Ash
- 9 October 2020
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 5 (41) , 26335-26346
Abstract
The exploration of high-value-added materials using inorganic solid waste is a very important contribution to sustainable development. Coal gangue ash (CGA) as a solid waste was chosen as catalyst support. Five low-cost catalysts modified by different promoters (Co, Ce, Fe, Mn, and Mo) were prepared using a co-impregnation method. The toluene steam reforming tests were carried out at 800 °C under S/C = 2 (steam-to-carbon mole ratio). Catalyst characteristics were evaluated using X-ray diffraction (XRD), the Brunauer–Emmett–Teller (BET) method, temperature-programmed reduction (TPR), and Raman spectroscopy. The results showed that most promoters could interact with a Ni active compound and enhance the toluene conversion and H2 yield. The Mo-Ni/CGA-1d (1d means the acid pretreatment time) catalyst performed the best catalytic activity, and corresponding toluene conversion and H2 yield was equal to 92.6 and 62.3%, respectively, and it should be due to the formation of Mo-Ni alloy. Meanwhile, the Mo-Ni/CGA-1d catalyst exhibited higher stability during the runtime of 300 min compared with the Mn-Ni/CGA-1d catalyst, which can be attributed to the formation of the Mo2C structure with high-carbon-resistance ability. This is perhaps because the dissociation of CO2 or H2O on the Mo2C structure surface is beneficial to the production of free oxygen species, which can accelerate the removal of carbon deposition on the catalyst surface.Keywords
Funding Information
- National Natural Science Foundation of China (21606228)
This publication has 57 references indexed in Scilit:
- Enhanced reforming of mixed biomass tar model compounds using a hybrid gliding arc plasma catalytic processCatalysis Today, 2019
- Synthesis of Ni/γ-Al2O3SiO2 catalysts with different silicon precursors for the steam toluene reformingMicroporous and Mesoporous Materials, 2019
- Ni/Ce Al2O3 for optimum hydrogen production from biomass/tar model compounds: Role of support type and ceria modification on desorption kineticsInternational Journal of Hydrogen Energy, 2019
- Combined steam-dry reforming of toluene in syngas over CaNiRu/Al2O3 catalystsInternational Journal of Green Energy, 2019
- Effects of Cu and Fe Additives on Low-Temperature Catalytic Steam Reforming of Toluene Over Ni/AC CatalystsCatalysis Surveys from Asia, 2019
- Fluidizable Fe–Co/Ce–ZrO2 Catalysts for Steam Reforming of Toluene as a Tar Surrogate in Biomass GasificationEnergy & Fuels, 2018
- Encapsulating Ni/CeO2-ZrO2 with SiO2 layer to improve it catalytic activity for steam reforming of tolueneCatalysis Communications, 2017
- Catalytic reforming of toluene and naphthalene (model tar) by char supported nickel catalystFuel, 2017
- Steam reforming of phenol as biomass tar model compound over Ni/Al2O3 catalystFuel, 2016
- Ni/Ru–Mn/Al2O3 catalysts for steam reforming of toluene as model biomass tarRenewable Energy, 2016