Studies on Modification of Surface Properties in Polycarbonate (PC) Film Induced by DC Glow Discharge Plasma
Authors:
Open Access
- 4 December 2011
- journal article
- research article
- Published by Hindawi Limited in International Journal of Polymer Science
- Vol. 2011, 1-7
Abstract
The polycarbonate film (PC) surface was treated using glow discharge low-pressure air plasma. The modified surface was characterized by contact angle, FTIR, XRD, AFM, and XPS analysis. The surface-modified samples were further investigated using T-peel test for technical applications. The surface energy of the sample was estimated by measuring contact angle. The results show that, after plasma treatment, the root mean square (RMS) roughness of PC film was gradually increased with exposure time. Plasma treatment modified the chemical composition of the polymer surface and it made the surface to be highly hydrophilic. It was found that the air plasma treatment increases the polar component of PC film.Keywords
This publication has 15 references indexed in Scilit:
- Adhesive properties of polypropylene (PP) and polyethylene terephthalate (PET) film surfaces treated by DC glow discharge plasmaVacuum, 2008
- Dielectric barrier discharge technique in improving the wettability and adhesion properties of polymer surfacesIEEE Transactions on Plasma Science, 2005
- Surface modification of polymeric materials by plasma immersion ion implantationNuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2005
- Investigation of Plasma-Induced Photochemical Reaction on a Polypropylene SurfaceThe Journal of Physical Chemistry B, 2003
- Surface modification of polymer surfaces: atmospheric plasma versus vacuum plasma treatmentsJournal of Physics D: Applied Physics, 2001
- Characterisation of poly(ethylene terephthalate) and cotton fibres after cold SF6 plasma treatmentJournal of Materials Chemistry, 2001
- Argon plasma-induced modifications at the surface of polycarbonate thin filmsApplied Surface Science, 1998
- Plasma and ion beam surface treatment of polyethyleneSurface and Coatings Technology, 1995
- Plasma surface modification of polymers for improved adhesion: a critical reviewJournal of Adhesion Science and Technology, 1993
- Multitechnique surface spectroscopic studies of plasma modified polymers III. H2O and O2/H2O plasma modified poly(methyl methacrylate)sJournal of Polymer Science Part A: Polymer Chemistry, 1989