Assessing specific gravity of youngEucalyptusplantation trees using a resistance drilling technique
- 24 September 2016
- journal article
- research article
- Published by Walter de Gruyter GmbH in Holzforschung
- Vol. 71 (2) , 137-145
Abstract
The resistance drilling technique has been in focus for assessing the specific gravity (SG) of youngEucalyptustrees from plantations for pulpwood production. Namely, the data of 50 34-month-old and 50 62-month-old trees fromEucalyptus grandis×Eucalyptus urophyllaclonal plantations was evaluated, while the relative resistance profiles were collected with the amplitude in a scale from 0 to 100% of each tree at the breast height. For laboratory determination of SG and moisture content (MC), 3-cm-thick disks were taken at breast height. The average resistance amplitude of a full drill penetration or a half-diameter penetration showed weak correlations with SG for both 34-month-old and 62-month-old trees. However, when the two age classes were combined, the strength of the relationship was improved significantly, with a correlation coefficient ranging from 0.71 to 0.77 with respect to SG determined from strip samples and from 0.59 to 0.72 with respect to SG determined from wedge samples. The drill penetration depth had a significant effect on the relationship between average amplitude and SG. A clear trend of weakening correlation was observed with increasing drill penetration. As a result, the average resistance amplitude of a half-diameter drilling (from bark-to-pith) is more advantageous for assessing the SG of youngEucalyptustrees than a whole-diameter drilling.Keywords
This publication has 19 references indexed in Scilit:
- Prediction of oven-dry density of wood by time-domain terahertz spectroscopyHolzforschung, 2013
- Predicting Douglas-fir wood density by artificial neural networks (ANN) based on progeny testing informationHolzforschung, 2013
- Estimating mechanical properties and specific gravity for five-year-old Eucalyptus tereticornis having broad moisture content range by NIR spectroscopyHolzforschung, 2011
- Determinação da densidade básica da madeiras de Eucalyptus por diferentes métodos não destrutivosRevista Árvore, 2011
- Non-destructive assessment of green density and moisture condition in plantation-grown radiata pine (Pinus radiata D. Don.) by increment core measurementsHolzforschung, 2010
- An analysis of sensitivities contributing measurement error to Resistograph valuesCanadian Journal of Forest Research, 2010
- Caracterização tecnológica, para produção de celulose, da nova geração de clones de Eucalyptus do BrasilRevista Árvore, 2005
- Rapid assessment of wood density of live trees using the Resistograph for selection in tree improvement programsCanadian Journal of Forest Research, 2003
- RESISTOGRAPH and X-Ray Density Charts of Wood. Comparative Evaluation of Drill Resistance Profiles and X-ray Density Charts of Different Wood SpeciesHolzforschung, 1996
- Simplifying functionals in the theory of elastoplastic processesInternational Applied Mechanics, 1978