Experimental Study of the Hydraulic Performances of Two Three-Bladed Inducers in Water, Water With Dissolved CO2, and Jet Fuel
Authors:
- 28 August 2020
- journal article
- research article
- Published by ASME International in Journal of Fluids Engineering
- Vol. 142 (11)
Abstract
Inducers in centrifugal pumps are generally placed upstream to increase the pressure before the impeller and prevent cavitation occurrence. Their general goal is to obtain a positive impact on the performances of a pump in a two-phase regime. Cavitation phenomenon has been the subject of many studies; however, the influence of the presence of dissolved gas in the liquid pumped under particular operating conditions remains not sufficiently explored. To the best of our knowledge, aviation jet fuel cavitation is moderately documented. In the present work, we conducted an experimental study on two three-bladed axial inducers at partial flow rates only in cavitating and noncavitating regimes. The experimental work used aviation jet fuel, water, and water with dissolved content of CO2 at constant temperature in two closed loops with transparent test sections. In one tank, a specific device is placed to inject a controlled quantity of CO2 and to dissolve it in water. We achieved a comparison of the flow dynamics through the use of a high-speed camera with a sampling rate of 1000 Hz. The results show inducers' water–CO2 cavitation performances to be in good agreement with aviation jet fuel cavitation results.Keywords
This publication has 21 references indexed in Scilit:
- Influence of the Blade Number on Inducer Cavitating BehaviorJournal of Fluids Engineering, 2012
- Experimental characterization of aviation-fuel cavitationPhysics of Fluids, 2010
- Effects of number of blades on the performance of the turbopump inducerJournal of Fluid Machinery, 2009
- Suppression of Cavitation Instabilities in an Inducer by J GrooveJournal of Fluids Engineering, 2008
- Hub shape effects on the inducers performance under cavitationProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2006
- Effect of Tip Clearance on the Performance of a Turbopump InducerJournal of Fluid Machinery, 2006
- Influence of peripheral blade angle on performance and stability of axial inducersProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2005
- A Theoretical Analysis of Alternate Blade Cavitation in InducersJournal of Fluids Engineering, 1999
- A Theoretical Analysis of Rotating Cavitation in InducersJournal of Fluids Engineering, 1993
- III. Experiments on the quantity of gases absorbed by water, at different temperatures, and under different pressuresPhilosophical Transactions of the Royal Society of London, 1803