Separation of Pt(IV) and Rh(III) from Chloride Solution by Solvent Extraction with Amine and Neutral Extractants
Authors:
- 1 January 2011
- journal article
- Published by Japan Institute of Metals in MATERIALS TRANSACTIONS
- Vol. 52 (11) , 2071-2076
Abstract
Solvent extraction experiments were performed to separate platinum and rhodium from mixed chloride solution by using amine and neutral extractants. Effects of extraction conditions on the separation of the two metals were investigated as a function of extractant concentration in the HCl concentration range from 1 to 9 mol/dm3. Alamine304-1, Alamine308, Alamine336, Aliquat336, TBP, TOPO and DOS were tested in our study. The concentration of Pt(IV) and Rh(III) in the mixed solution was fixed at 0.001 mol/dm3 and 0.0001 mol/dm3, respectively. In the extraction with amine, Pt was completely extracted irrespective of HCl concentration, while the extraction percentage of Rh depended on extraction condition. In the extraction with neutral extractants, the extraction percentage of Rh was nearly zero whereas 1 mol/dm3 TOPO completely extracted most of Pt in our experimental range. Separation of Pt from Rh by amines except Alamine336 was possible only from 9 mol/dm3 HCl solution, while complete separation of the two metals by TOPO was possible in the HCl concentration range from 1 to 9 mol/dm3. From the consideration of the economics of the separation process, our results indicate that TBP is better than TOPO in separating Pt and Rh from chloride solution.Keywords
This publication has 27 references indexed in Scilit:
- Solvent extraction separation and recovery of palladium and platinum from chloride leach liquors of spent automobile catalystSeparation and Purification Technology, 2010
- Production of high-purity molybdenum compounds from a Cu–Mo acid-washed liquor using solvent extraction. Part 2: Pilot and plant operationsMinerals Engineering, 2009
- Extraction and separation of Pt(IV)/Rh(III) from acidic chloride solutions using Aliquat 336Journal of Industrial and Engineering Chemistry, 2009
- Extraction of Co(II) and Ni(II) from concentrated HCl solutions using Alamine 336Hydrometallurgy, 2009
- Simulation- and optimisation-oriented modelling considerations for the extraction of Ni(II) from its acidic aqueous chloride solutions into Alamine 336–m-xylene systemsHydrometallurgy, 2009
- Solvent Extraction of PtCl4 from Hydrochloric Acid Solution with Alamine336MATERIALS TRANSACTIONS, 2008
- Extraction of Mn(II) from aqueous hydrochloric acid solutions into Alamine 336–m-xylene systemHydrometallurgy, 2007
- A review of methods of separation of the platinum-group metals through their chloro-complexesReactive and Functional Polymers, 2005
- Platinum group metals (PGM); occurrence, use and recent trends in their determinationTrAC Trends in Analytical Chemistry, 2000
- Speciation and separation of rhodium (III) from chloride solutions: a critical reviewHydrometallurgy, 1996