Effect of nanosilica and silica fume content on the bond properties of macro-synthetic fibre in cement-based composites
Authors:
- 1 February 2013
- journal article
- Published by Emerald Publishing in Magazine of Concrete Research
- Vol. 65 (3) , 148-157
Abstract
In this study, the effects of nanosilica and silica fume content on the bond properties of macro-synthetic fibre in cement-based composites were investigated. The pullout behaviour of macro-synthetic fibre was evaluated by performing dog-bone bond tests according to JCI SF-8 at nanosilica and silica fume replacement ratios of 0, 2, 4, 6 and 8% based on cement weight. The addition of nanosilica and silica fume had a significant effect on the bond properties of macro-synthetic fibre. Specifically, the addition of 0∼2% nanosilica enhanced pullout behaviour, bond strength and interface toughness, whereas 4% or more nanosilica reduced pullout behaviour, bond strength and interface toughness. For silica fume, pullout load-to-displacement behaviour, bond strength and interface toughness increased in the range of 0 to 8%. These results demonstrate that the presence of nanosilica and silica fume strengthen the fibre–matrix interface of macro-synthetic fibre in cement-based composites by filling voids in the interface region. The relative bond strength and interface toughness were also analysed, except for compressive strength, to evaluate the bond properties of macro-synthetic fibre in cement-based composites at various nanosilica and silica fume replacement ratios. The ratios of nanosilica and silica fume had a significant effect on bond properties, regardless of the compressive strength of the cement-based composites. Microstructural analysis of macro-synthetic fibre after pullout tests showed scratches due to friction.Keywords
This publication has 9 references indexed in Scilit:
- Use of nano-silica to increase early strength and reduce setting time of concretes with high volumes of slagCement and Concrete Composites, 2012
- Effect of nano-silica on rheology and fresh properties of cement pastes and mortarsConstruction and Building Materials, 2009
- Performance of synthetic macrofibres in reinforced concrete for tunnel liningsMagazine of Concrete Research, 2009
- Bond behaviour between recycled aggregate concrete and steel rebarsConstruction and Building Materials, 2007
- Preliminary study on the water permeability and microstructure of concrete incorporating nano-SiO2Cement and Concrete Research, 2005
- Pullout behavior of polypropylene fibers from cementitious matrixCement and Concrete Research, 2004
- Effect of silica fume on steel fiber bond characteristics in reactive powder concreteCement and Concrete Research, 2004
- Pullout behavior of steel fibers from cement-based compositesCement and Concrete Research, 1997
- Effect of interfacial properties on the crack propagation in cementitious compositesAdvanced Cement Based Materials, 1996