Intelligent Agents for the Optimization of Atomic Layer Deposition
- 5 April 2021
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 13 (14) , 17022-17033
Abstract
Atomic layer deposition (ALD) is a highly controllable thin film synthesis approach with applications in computing, energy, and separations. The flexibility of ALD means that it can access a massive chemical catalogue; however, this chemical and process diversity results in significant challenges in determining processing parameters that result in stable and uniform film growth with minimal precursor consumption. In situ measurements of the ALD growth per cycle (GPC) can accelerate process development but it still requires expert intuition and time-consuming trial and error to identify acceptable processing parameters. This procedure is made more difficult by the presence of experimental noise in the GPC values and the complexity of ALD surface chemistries. A need exists for efficient optimization approaches capable of autonomously determining processing conditions resulting in optimal ALD film growth. In this work, we present the development of three optimization strategies and compare their performance in optimizing four simulated ALD processes. Furthermore, the effect of noise in the GPC measurements on optimization convergence is studied.Keywords
Funding Information
- Argonne National Laboratory (DE-AC02-06CH11357)
This publication has 18 references indexed in Scilit:
- A brief review of atomic layer deposition: from fundamentals to applicationsMaterials Today, 2014
- A model-based methodology for the analysis and design of atomic layer deposition processes—Part III: Constrained multi-objective optimizationChemical Engineering Science, 2013
- A model-based methodology for the analysis and design of atomic layer deposition processes—Part II:Chemical Engineering Science, 2013
- Crystallinity of inorganic films grown by atomic layer deposition: Overview and general trendsJournal of Applied Physics, 2013
- A model-based methodology for the analysis and design of atomic layer deposition processes—Part I: Mechanistic modelling of continuous flow reactorsChemical Engineering Science, 2012
- Simple model for atomic layer deposition precursor reaction and transport in a viscous-flow tubular reactorJournal of Vacuum Science & Technology A, 2011
- Space-filling Latin hypercube designs for computer experimentsOptimization and Engineering, 2010
- Low-Temperature Al2O3 Atomic Layer DepositionChemistry of Materials, 2004
- Viscous flow reactor with quartz crystal microbalance for thin film growth by atomic layer depositionReview of Scientific Instruments, 2002
- Kinetics of the WF6 and Si2H6 surface reactions during tungsten atomic layer depositionSurface Science, 2001