Stall Inception in a High-Speed Centrifugal Compressor During Speed Transients
- 26 September 2017
- journal article
- Published by Wiley in Journal of Turbomachinery
- Vol. 139 (12) , 121004
Abstract
The inception and evolution of rotating stall in a high-speed centrifugal compressor are characterized during speed transients. Experiments were performed in the single stage centrifugal compressor (SSCC) facility at Purdue University and include speed transients from subidle to full speed at different throttle settings while collecting transient performance data. Results show a substantial difference in the compressor transient performance for accelerations versus decelerations. This difference is associated with the heat transfer between the flow and the hardware. The heat transfer from the hardware to the flow during the decelerations locates the compressor operating condition closer to the surge line and results in a significant reduction in surge margin during decelerations. Additionally, data were acquired from fast-response pressure transducers along the impeller shroud, in the vaneless space, and along the diffuser passages. Two different patterns of flow instabilities, including mild surge and short-length-scale rotating stall, are observed during the decelerations. The instability starts with a small pressure perturbation at the impeller leading edge (LE) and quickly develops into a single-lobe rotating stall burst. The stall cell propagates in the direction opposite of impeller rotation at approximately one-third of the rotor speed. The rotating stall bursts are observed in both the impeller and diffuser, with the largest magnitudes near the diffuser throat. Furthermore, the flow instability develops into a continuous high frequency stall and remains in the fully developed stall condition.Keywords
This publication has 27 references indexed in Scilit:
- Stall, Surge, and 75 Years of ResearchJournal of Turbomachinery, 2015
- Spike-Type Compressor Stall Inception, Detection, and ControlAnnual Review of Fluid Mechanics, 2010
- Instability Pathology of a High Speed Centrifugal Compressor1999
- Aerodynamic Performance and Instability Initiation of a High Speed Research Centrifugal CompressorInternational Journal of Turbo & Jet-Engines, 1997
- Rotating Stall Acoustic Signature in a Low-Speed Centrifugal Compressor: Part 1—Vaneless DiffuserJournal of Turbomachinery, 1995
- Rotating Stall Acoustic Signature in a Low Speed Centrifugal Compressor: Part 2 — Vaned Diffuser1993
- A Theoretical Model for Rotating Stall in the Vaneless Diffuser of a Centrifugal CompressorJournal of Engineering for Gas Turbines and Power, 1985
- Distinction Between Different Types of Impeller and Diffuser Rotating Stall in a Centrifugal Compressor With Vaneless DiffuserJournal of Engineering for Gas Turbines and Power, 1984
- Review—Axial Compressor Stall PhenomenaJournal of Fluids Engineering, 1980
- Rotating Stall in a Radial Vaneless DiffuserJournal of Basic Engineering, 1964