Physics-Informed Optimization for the Sub-Feature-Scale Fabrication of Hollow Microneedles via Digital Light Processing
Open Access
- 29 May 2026
- journal article
- research article
- Published by MDPI AG in Micromachines
- Vol. 17 (6) , 678
Abstract
To overcome low bioavailability and high trauma in inner ear therapies, targeted delivery across the round window membrane (RWM) via hollow microneedles (HMNs) offers a promising solution. However, the fabrication of high-aspect-ratio, small-size HMNs remains challenging. This study demonstrates the successful fabrication of small-outer-diameter HMNs using a 10 μm resolution digital light processing (DLP) system. Finite element analysis (FEA) identified a double tangent-arc transition as the optimal structural design for minimizing stress concentration. To manage the heightened parameter sensitivity at sub-feature-scale fabrication, a corrected curing index (CCI) model was established via a physics-informed regression approach incorporating polymerization kinetics and nonlinear spatial intensity distribution, achieving high fitting accuracy (R2 > 0.96). Under optimized parameters, the fabricated HMNs possessed mean dimensions of 805.13 μm in height, 37.54 μm in inner diameter, and 79.36 μm in outer diameter. Compressive tests exhibited a robust structural strength of up to 141 mN per needle following post-curing. Combined in silico and in vitro experiments demonstrated excellent penetration performance. Furthermore, the HMNs achieved stable, pressure-dependent delivery with volumetric flow rates rising from 0.14 mL∙min−1 to 0.39 mL∙min−1 as driving pressure escalated from 50 kPa to 300 kPa, validating their functional capacity for controlled drug administration.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFB4705801)
- National Key Research and Development Program of China (2023YFB4705800)
- National Natural Science Foundation of China (52175446)
- Shenzhen Science and Technology Program (20250530174433004)
- Guangdong Provincial Key Laboratory of Minimally Invasive Surgical Instruments and Manufacturing Technology (MISIMT-2021-2)
- Distinguished Young Scholars Program of the Natural Science Foundation of Heilongjiang Province (JQ2024E004)
- Key Research and Development Program of Heilongjiang Province (2024ZXDXC24)
- Heilongjiang Provincial “Double First-Class” Discipline Collaborative Innovation Achievement Project (LJGXCG2025-F01)
This publication has 65 references indexed in Scilit:
- Assessment of fused deposition modeling (FDM) parameters for fabrication of solid and hollow microneedles using polylactic acid (PLA)Polymers for Advanced Technologies, 2024
- Remote‐Controlled Sensing and Drug Delivery via 3D‐Printed Hollow MicroneedlesAdvanced Healthcare Materials, 2024
- Pixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D PrintingAdvanced Functional Materials, 2023
- 3D‐Printed Microinjection Needle Arrays via a Hybrid DLP‐Direct Laser Writing StrategyAdvanced Materials Technologies, 2023
- Biofabricating hollow microneedle array with controllable microstructure for cell transplantationJournal of Biomedical Materials Research Part B: Applied Biomaterials, 2022
- 3D‐Printed Hydrogel‐Filled Microneedle ArraysAdvanced Healthcare Materials, 2021
- A Review of 3D Printing Technologies for Soft Polymer MaterialsAdvanced Functional Materials, 2020
- Biocompatible 3D Printed Microneedles for Transdermal, Intradermal, and Percutaneous ApplicationsAdvanced Engineering Materials, 2019
- An Insulin Microneedle Pen (IMP) for Self‐Subcutaneous Insulin InjectionAdvanced Materials Technologies, 2018
- Analysis of epoxy resin curing kinetics using the Avrami theory of phase changePolymer Engineering & Science, 1987