Influences of Process Parameters on Thermophysiological Comfort of Mechanically Recycled PET and Wool-blended Woven Fabrics
Open Access
- 1 January 2025
- journal article
- Published by SAGE Publications in AATCC Journal of Research
- Vol. 12 (1)
Abstract
Large volumes of plastic waste are currently being generated, posing a significant challenge for waste management. Refurbishing plastic waste into value-added textile products is one of the potent options for handling waste. There is a need to design fabrics from recycled materials without compromising the essential properties. This research article focuses on the impact of incorporating recycled polyester fibre with wool into woven fabric for suiting applications. This research explores the influences of yarn blend, linear density and twist multiplier on the thermophysiological comfort of mechanically recycled polyester and wool-blended woven fabrics. Fabric comfort was assessed based on instrumental parameters, such as air permeability, water vapour permeability, moisture management, thermal conductivity, thermal resistance, thermal absorptivity and surface roughness. It is observed that increasing the amount of recycled polyester fibre improved the thermal conductivity, air and moisture vapour transmission, fabric roughness and moisture management. Higher wool content improved the thermal insulation. Finer yarn samples demonstrated enhanced air and water vapour permeability. Coarser fabric samples showed higher surface roughness, better thermal resistance and moisture management. Increasing the yarn twist multiplier increased the fabric roughness and enhanced air, thermal and moisture vapour transmission, thermal absorptivity, and overall moisture management, but it also reduced thermal resistance in fabrics.Keywords
This publication has 27 references indexed in Scilit:
- Thermoresponsive Skin-like Fabric for Personal Comfort and ProtectionACS Applied Materials & Interfaces, 2024
- Thermal Comfort Properties of 100% Cashmere Knitted FabricsFibers and Polymers, 2024
- Drip molding process of PCM for improving thermal and moisture comfort of thermal protective clothingInternational Journal of Thermal Sciences, 2023
- Plasma-assisted in-situ preparation of silver nanoparticles and polypyrrole toward superhydrophobic, antimicrobial and electrically conductive nonwoven fabrics from recycled polyester wasteJournal of Industrial and Engineering Chemistry, 2023
- Preparation of Photochromic and Photoluminescent Nonwoven Fibrous Mat from Recycled Polyester WasteJournal of Polymers and the Environment, 2022
- Preparation and Formation Mechanism Analysis of Regenerated Silk Fibroin/Polyvinyl Alcohol Blended Fibers with Waste Silk QuiltFibers and Polymers, 2022
- Textile Fabrics Containing Recycled Poly(ethylene terephthalate), Oyster Shells, and Silica Aerogels with Superior Heat Insulation, Water Resistance, and Antibacterial PropertiesACS Applied Polymer Materials, 2021
- Study of Thermal Comfort Properties on Socks made from Recycled Polyester/Virgin Cotton and its BlendsFibers and Polymers, 2021
- Carbon footprint reduction in the textile process chain: Recycling of textile materialsFibers and Polymers, 2012
- Effect of yarn properties on thermal comfort of knitted fabricsInternational Journal of Thermal Sciences, 2007