Nanoporous carbon materials with enhanced supercapacitance performance and non-aromatic chemical sensing with C1/C2 alcohol discrimination
Open Access
- 1 September 2016
- journal article
- research article
- Published by Taylor & Francis in Science and Technology of Advanced Materials
- Vol. 17 (1) , 483-492
Abstract
We have investigated the textural properties, electrochemical supercapacitances and vapor sensing performances of bamboo-derived nanoporous carbon materials (NCM). Bamboo, an abundant natural biomaterial, was chemically activated with phosphoric acid at 400 °C and the effect of impregnation ratio of phosphoric acid on the textural properties and electrochemical performances was systematically investigated. Fourier transform-infrared (FTIR) spectroscopy confirmed the presence of various oxygen-containing surface functional groups (i.e. carboxyl, carboxylate, carbonyl and phenolic groups) in NCM. The prepared NCM are amorphous in nature and contain hierarchical micropores and mesopores. Surface areas and pore volumes were found in the range 218–1431 m2 g−1 and 0.26–1.26 cm3 g−1, respectively, and could be controlled by adjusting the impregnation ratio of phosphoric acid and bamboo cane powder. NCM exhibited electrical double-layer supercapacitor behavior giving a high specific capacitance of c.256 F g−1 at a scan rate of 5 mV s−1 together with high cyclic stability with capacitance retention of about 92.6% after 1000 cycles. Furthermore, NCM exhibited excellent vapor sensing performance with high sensitivity for non-aromatic chemicals such as acetic acid. The system would be useful to discriminate C1 and C2 alcohol (methanol and ethanol).Keywords
Funding Information
- WPI, MEXT
This publication has 47 references indexed in Scilit:
- Nanoarchitectonics for Mesoporous MaterialsBulletin of the Chemical Society of Japan, 2011
- Design and tailoring of a hierarchical graphene-carbon nanotube architecture for supercapacitorsJournal of Materials Chemistry, 2010
- Layer‐by‐Layer Films of Graphene and Ionic Liquids for Highly Selective Gas SensingAngewandte Chemie International Edition, 2010
- Development of mesoporous structure and high adsorption capacity of biomass-based activated carbon by phosphoric acid and zinc chloride activationChemical Engineering Journal, 2010
- Methylene blue number as useful indicator to evaluate the adsorptive capacity of granular activated carbon in batch mode: Influence of adsorbate/adsorbent mass ratio and particle sizeJournal of Hazardous Materials, 2009
- Layer-by-Layer Films of Dual-Pore Carbon Capsules with Designable Selectivity of Gas AdsorptionJournal of the American Chemical Society, 2009
- A Layered Mesoporous Carbon Sensor Based on Nanopore‐Filling Cooperative Adsorption in the Liquid PhaseAngewandte Chemie International Edition, 2008
- Resonant Raman spectroscopy of disordered, amorphous, and diamondlike carbonPhysical Review B, 2001
- The influence of activated carbon surface chemical composition on the adsorption of acetaminophen (paracetamol) in vitroColloids and Surfaces A: Physicochemical and Engineering Aspects, 2001
- Interpretation of Raman spectra of disordered and amorphous carbonPhysical Review B, 2000