Surface Modification of Cured Cement Pastes by Silane Coupling Agents
- 12 February 2013
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 5 (4) , 1218-1225
Abstract
X-ray photoelectron spectroscopy (XPS) and static contact angle measurements were used to study the interaction between silane coupling agents and cured cement paste. Three different silane coupling agents were investigated: aminopropyltriethoxy silane (APTES), 3-glycidyloxypropyltrimethoxy silane (GPTMS), and methoxy-terminated polydimethxyl siloxane (PDMS). These silanes have different end groups, so the change in surface energy after undergoing a successful reaction between the silane and hydroxyls on the surface of the cement paste was demonstrated by a change in contact angle. Relative to untreated samples, APTES samples decreased the contact angle, PDMS samples increased the contact angle, and GPTMS did not show a significant change in contact angle. Samples with a water-to-cement ratio (w/c) of 0.5 showed a larger change in contact angle than 0.4 w/c ratio samples, because of a greater number of hydroxyl groups at the surface. Deconvolution of the O 1s and Si 2p XPS peaks were performed to determine contributions from bridging and nonbridging atoms. An increase in bridging silicon and oxygen atoms relative to untreated samples indicated successful silane condensation and that a covalent bond was formed between the cement paste and silanes.Keywords
This publication has 32 references indexed in Scilit:
- Effect of silane coupling agent on the durability of epoxy adhesion for structural strengthening applicationsPolymer Engineering & Science, 2012
- The effect of five silane coupling agents on the bond strength of a luting cement to a silica-coated titaniumDental Materials, 2007
- Surface energetics of cementitious materials and their wettability by an epoxy adhesiveColloids and Surfaces A: Physicochemical and Engineering Aspects, 2006
- Using heterogeneous silane patterns to maintain adhesion and decrease water penetration into epoxy/aluminum interfacesJournal of Adhesion Science and Technology, 2006
- Adsorption and heterocoagulation of nonionic surfactants and latex particles on cement hydratesJournal of Colloid and Interface Science, 2005
- Surface chemistry of cement pastes: a study by x‐ray photoelectron spectroscopySurface and Interface Analysis, 2002
- Zeta-Potential Study of Calcium Silicate Hydrates Interacting with Alkaline CationsJournal of Colloid and Interface Science, 2001
- The critical humidity effect in the adhesion of epoxy to glass: role of hydrogen bondingJournal of Adhesion Science and Technology, 2000
- Hygrothermal effects of epoxy resin. Part I: the nature of water in epoxyPolymer, 1999
- Electrokinetic Properties which Control the Coagulation of Silicate Cement Suspensions during Early Age HydrationJournal of Colloid and Interface Science, 1998