A vector‐valued ground motion intensity measure for base‐isolated buildings in far‐field regions
- 9 September 2024
- journal article
- research article
- Published by Wiley in The Structural Design of Tall and Special Buildings
- Vol. 33 (17) , 1-1940
Abstract
In this study, the effects of the spectral acceleration at the superstructure first‐mode period on the isolator displacement are investigated for far‐field ground motions. For this purpose, two different base‐isolated models are subjected to 165 far‐field ground motions. It is demonstrated that considering the spectral acceleration at the superstructure first‐mode period, besides that at the effective period, improves the estimation accuracy of isolator displacement. ASCE 7‐22 modifies the scaling period range to consider the superstructure first mode period and proposes the new period range from the superstructure first‐mode period to the 1.25 times effective period. In the ASCE 7‐22, the same weight factor is used for the whole period range. However, the present study shows that adding the superstructure first‐mode related period range with appropriate weight factor to the effective period‐based scaling range decreases the dispersion of isolator displacement in the nonlinear response history analyses (NRH). Then, to overcome the spectral shape effects on the fragility curves, a vector‐valued intensity measure parameter is obtained by combining spectral acceleration at the effective period and reduced spectral acceleration at the superstructure first‐mode period. The optimum contribution factor for the spectral acceleration at the superstructure first‐mode period is defined as the ratio of the superstructure first‐mode period to the effective period. The article shows that the proposed parameter is efficient and sufficient to be used as an intensity measure for far‐field ground motions. Furthermore, regression analysis results indicate that this vector‐valued intensity measure parameter correlates well with the isolator displacement. Further, the article shows that using the proposed IM parameter in the fragility curves makes the collapse margin ratio of these curves less sensitive to the spectral shape of the selected ground motions.Keywords
This publication has 60 references indexed in Scilit:
- Interstory drift based scaling of earthquake ground motionsEarthquake Engineering & Structural Dynamics, 2021
- Site dependence and record selection schemes for building fragility and regional loss assessmentEarthquake Engineering & Structural Dynamics, 2017
- Spectral shape metrics and structural collapse potentialEarthquake Engineering & Structural Dynamics, 2016
- Average spectral acceleration as an intensity measure for collapse risk assessmentEarthquake Engineering & Structural Dynamics, 2015
- Conditional spectrum‐based ground motion selection. Part I: Hazard consistency for risk‐based assessmentsEarthquake Engineering & Structural Dynamics, 2013
- Comparative response assessment of minimally compliant low‐rise conventional and base‐isolated steel framesEarthquake Engineering & Structural Dynamics, 2010
- A vector-valued ground motion intensity measure consisting of spectral acceleration and epsilonEarthquake Engineering & Structural Dynamics, 2005
- Near‐fault ground motions, and the response of elastic and inelastic single‐degree‐of‐freedom (SDOF) systemsEarthquake Engineering & Structural Dynamics, 2004
- Incremental dynamic analysisEarthquake Engineering & Structural Dynamics, 2001
- Earthquake ground motion characteristics and seismic energy dissipationEarthquake Engineering & Structural Dynamics, 1995