A Comparative Differential Scanning Calorimetry Study of Precipitation Hardenable Copper-Based Alloys with Optimized Strength and High Conductivity
Open Access
Abstract
Copper alloys with chromium, hafnium, and scandium combining enhanced strength as well as high electrical and thermal conductivity are analyzed in depth. The aim is to compare the precipitation process during temperature exposure to meet increasing material requirements. This research focuses on alloying elements having a limited, maximum 1 wt.%, and with temperature decreasing solubility in copper. For the simultaneous enhancement of mechanical strength and conductivity, precipitation hardening is the utilized mechanism during the processing of as-casted annealed and quenched specimens and in combination with optional cold-rolling prior to the aging process. Extensive DSC measurements, accompanied by metallographic investigations, and the analysis of hardness and electrical conductivity, lead to a versatile description and comparison of different alloying systems. CuCr0.7 starts to precipitate early and is mainly influenced by the temperature of aging. Provoking the solid solution with cold deformation has a less significant influence on the following precipitation. CuSc0.3 and CuHf0.7 precipitate at higher temperatures and are highly influenced by cold deformation prior to aging. Furthermore, CuHf0.7 and CuSc0.3 show advantages regarding the recrystallization behavior, making them especially applicable for higher operating temperatures. Future research will assess ternary alloy combinations to further scoop the potential.Keywords
Funding Information
- Baden-Wuerttemberg Ministry of Science, Research and Culture and the Baden-Wuerttemberg Cooperative State University Stuttgart
This publication has 73 references indexed in Scilit:
- Atomic scale investigation of Cr precipitation in copperActa Materialia, 2012
- Copper-scandium system: Thermodynamic properties of intermetallics and liquid alloysRussian Metallurgy (Metally), 2010
- First-principles calculations of structural energetics of Cu–TM (TM=Ti, Zr, Hf) intermetallicsActa Materialia, 2007
- Study on improvement of conductivity of Cu-Cr-Zr alloysRare Metals, 2007
- The effect of cold work on the precipitation kinetics of AA6111 aluminumJournal of Materials Science, 2004
- Analysis of Precipitation and Dissolution in Overaged 7xxx Aluminium Alloys using DSCMaterials Science Forum, 2000
- The precipitation behaviour of ITER-grade Cu–Cr–Zr alloy after simulating the thermal cycle of hot isostatic pressingJournal of Nuclear Materials, 2000
- The Cr-Cu (Chromium-Copper) systemBulletin of Alloy Phase Diagrams, 1984
- Nucleation in solids: The induction and steady state effectsAdvances in Colloid and Interface Science, 1980
- The stored energy of cold workProgress in Materials Science, 1973