Bainite Reaction in Fe–Ni–C Alloys
Authors:
- 1 January 1991
- journal article
- Published by Japan Institute of Metals in Materials Transactions, JIM
- Vol. 32 (8) , 667-678
Abstract
In order to clarify the mechanism of bainite reaction, a metallographic study of isothermal-transformation products formed at various temperatures was made in Fe-9% Ni-0.08% C, −0.23% C, and −0.28% C alloys (mass%) where the solute drag-like effect does not occur. TTT diagrams were also examined. In all the alloys, the TTT diagram consists of two C-curves. The kinetic-Bs temperature is observed at 760 K in both of the 0.23 and 0.28% C alloys. In the 0.08% C alloy, the kinetic-Bs is not seen, but a “bay” appears around 750 K. The microstructure changes markedly below the kinetic-Bs in the 0.23 and 0.28% C alloys. Proeutectoid ferrite and degenerate pearlite form at temperatures above the kinetic-Bs, whereas upper bainite characterized by ferrite laths forming in parallel becomes dominant below the kinetic-Bs. The upper critical temperature for the formation of bainite (i.e., the microstructural-Bs) corresponds to the kinetic-Bs and is hardly affected by carbon content. TEM microstructure of bainitic ferrite is similar to that of the lath martensite. These results strongly suggest that the bainite reaction has its own C-curve and occurs by a displacive mechanism. A model for the bainite reaction as a displacive transformation is proposed; the bainite reaction is the martensitic transformation of which nucleation is assisted by the formation of carbon poor zones in the parent austenite as a result of statistical fluctuation of carbon concentration. This model deduces a prediction that the Bs temperature of Fe–M–C alloys (M: a substitutional element) is independent of carbon content and corresponds to the Ms temperature of the Fe–M binary alloy. It is demonstrated that the Bs temperature of 760 K in the Fe-9% Ni–C alloys is in very good agreement with the Ms temperature of Fe-9% Ni alloy. The incomplete transformation and the Bf temperature of bainite reaction are also discussed.Keywords
This publication has 18 references indexed in Scilit:
- Growth and overall transformation kinetics above the bay temperature in Fe-C-Mo alloysMetallurgical Transactions A, 1990
- Morphology and properties of low-carbon bainiteMetallurgical Transactions A, 1990
- Bainite transformation as a displacive decomposition of austenite.Bulletin of the Japan Institute of Metals, 1990
- The Effect of Ni Content on the Isothermal Character of Lath Martensitic Transformation in Fe-Ni AlloysMaterials Science Forum, 1990
- The bainite transformation as viewed from the diffusion school.Bulletin of the Japan Institute of Metals, 1989
- Effect of austenite strengthening on martensitic and bainitic transformationsScripta Metallurgica, 1987
- Another visit to the three definitions of bainiteScripta Metallurgica, 1987
- Statistics of martensitic nucleationActa Metallurgica, 1985
- The mechanism of bainite formation in steelsActa Metallurgica, 1980
- The Regular Solution Model for Stoichiometric Phases and Ionic Melts.Acta Chemica Scandinavica, 1970