Microstructure and mechanical properties of selective laser melted superalloy inconel 625.
Author:
- Ashabul AnamAAAshabul Anam
Open Access
- 4 March 2019
- thesis
- Published by University of Louisville
Abstract
Selective Laser Melting (SLM), a powder based Additive Manufacturing (AM) process, has gained considerable attention in the aerospace, biomedical and automotive industries due to its many potential benefits, such as, capability of fabricating complex three-dimensional components, shortened design to product time, reduction in process steps, component mass reduction and material flexibility. This process uses metallic powder and is capable of fabricating complex structures with excellent microstructure which make SLM not only an improvement over other manufacturing processes but also innovative material processing technology. Inconel 625, a nickel-based super alloy is widely popular in aerospace, chemical and nuclear industries. This alloy is characterized by having high tensile, creep and rupture strength and is widely used because of its excellent fatigue and good oxidation resistance properties. However, excessive tool wear and low material removal rate make it difficult to manufacture by conventional machining methods at room temperature. Selective laser melting, therefore, becomes a good solution for complex Inconel 625 parts. The formation of constituent phases of this alloy is a function of process parameters such as local temperature, hold time at temperature, local cooling rate and local compositions in the melt-pool. The effect of each process parameter on the resulting microstructure and mechanical properties must be understood in order to properly control the machines and predict the properties of the parts being fabricated. Therefore, the aim of the research work is to investigate the effect of key process variables of SLM systems (the EOS M270 Powder-bed system at The University of Louisville) on the melting response and solidification microstructure of Nickel based super-alloy Inconel 625. The effect of processing parameters on Inconel 625 was investigated on single track deposits and bulk deposits. Multiple combinations of laser power and scan speed were used to fabricate the deposits by selective laser melting (SLM). Surface morphology and dimensions of the single track deposits were characterized using optical and SEM microscopy. To evaluate the geometrical feature of the melt pool, the cross-section of the single track deposits was studied. The result was then utilized to develop a process parameter map which is insightful to identify the optimum parameters that produce high-density parts. Beside laser power and scan speed, scan pattern plays an important role in controlling microstructural features. Therefore, a careful study of scan pattern is important to understand microstructural evolution during SLM. In this study, two types of scanning pattern (Alternating and Rotating) were usedKeywords
This publication has 70 references indexed in Scilit:
- Investigation into the effect of process parameters on microstructural and physical properties of 316L stainless steel parts by selective laser meltingThe International Journal of Advanced Manufacturing Technology, 2014
- A Quantitative Model of Keyhole Instability Induced Porosity in Laser Welding of Titanium AlloyMetallurgical and Materials Transactions A, 2014
- Microstructures and Mechanical Properties of Ti6Al4V Parts Fabricated by Selective Laser Melting and Electron Beam MeltingJournal of Materials Engineering and Performance, 2013
- A comparison of the tensile, fatigue, and fracture behavior of Ti–6Al–4V and 15-5 PH stainless steel parts made by selective laser meltingThe International Journal of Advanced Manufacturing Technology, 2013
- On selective laser melting of ultra high carbon steel: Effect of scan speed and post heat treatmentMaterialwissenschaft und Werkstofftechnik, 2012
- Microstructural Architecture, Microstructures, and Mechanical Properties for a Nickel-Base Superalloy Fabricated by Electron Beam MeltingMetallurgical and Materials Transactions A, 2011
- As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser MeltingMetallurgical and Materials Transactions A, 2011
- Experimental studies on selective laser melting of metallic partsMaterialwissenschaft und Werkstofftechnik, 2008
- Microstructural evolution in laser-deposited multilayer Ti-6Al-4V builds: Part I. Microstructural characterizationMetallurgical and Materials Transactions A, 2004
- Solidification of an alloy 625 weld overlayMetallurgical and Materials Transactions A, 1996