Hot Forging-Based development of mining drill bit preforms: experimental and numerical analysis
Open Access
- 16 January 2026
- journal article
- research article
- Published by Springer Nature in International Journal of Material Forming
- Vol. 19 (1) , 8
Abstract
Low-alloy steel drill bits are commonly used in the mining industry for boring holes into rocks. They are characterized by high hardenability and a good combination of mechanical properties, with minimal additions of alloying elements. As product quality improves, the market becomes more competitive. Significant growth in the use of engineering development tools has also occurred, leading to improved performance in rock drilling, oil and mineral exploration, and the search for gemstones. Due to the constant cyclical mechanical stresses applied, the expected life of drill bits is often reduced by fatigue or mechanical wear, indicating that the market consistently requires the availability of new drill bits. This work aimed to demonstrate the suitability of hot forging as a substitute for machining to manufacture the specific profile of the drill bit preform used in rock drilling. A mining-industry partner selected AISI 8640 steel, as it is widely used for drilling applications. Tests were performed with AISI 8640 as a modeling material, and the results from the forging process were used to evaluate the punch movement and consequent metal flow, as well as the filling of the part’s cavity within the forging dies. The results obtained using Elementary Plasticity Theory (EPT) allowed verification of the physical experiment with AISI 8640 steel forged parts. Following this evaluation, numerical modeling was performed and compared with the hot forging process. Formation of the hollow cavity $$\sigma_b$$ within the part and the head of the preform in the same step was assessed. As a result of this optimized process, the reduction in the initial height of the billet and the preform formation were analyzed, with the finishing of the drill bit contingent upon the machining process. This hot forging demonstrated improved material utilization compared to the machining process, highlighting the benefits of deformation through simulations.
Keywords
Funding Information
- Universidade de Aveiro
This publication has 25 references indexed in Scilit:
- Processing parameters optimization in hot forging of AISI 4340 steel using instability map and reinforcement learningJournal of Materials Research and Technology, 2023
- Process parameters and system responses in friction extrusionJournal of Manufacturing Processes, 2022
- Numerical study on the hot compression test for bulk metal forming applicationSN Applied Sciences, 2022
- Combination gear hot forging process and microstructure optimizationJournal of Materials Research and Technology, 2022
- New insight into the radial forging process by an asymptotic-based axisymmetric analysisApplied Mathematical Modelling, 2022
- An analytical model integrated with toolpath design for wrinkling prediction in conventional spinningJournal of Materials Processing Technology, 2022
- Development of FEM-based digital twins for machining difficult-to-cut materials: A roadmap for sustainabilityJournal of Manufacturing Processes, 2022
- Modeling and exploiting the strip tension influence on surface imprinting during temper rolling of cold-rolled steelAdvances in Industrial and Manufacturing Engineering, 2021
- Investigating formability enhancement in double side incremental forming by developing a new test method of tension under cyclic bending and compressionJournal of Materials Processing Technology, 2020
- Optimization of the hot forging parameters for 4340 steel by processing mapsJournal of Materials Research and Technology, 2019