Shear bond strength of vat photopolymerization additive‐manufactured zirconia to veneering ceramic
Authors:
- 27 January 2025
- journal article
- Published by Wiley in Journal of Prosthodontics
Abstract
Purpose: To evaluate the shear bond strength (SBS) of stereolithography (SLA), digital light processing (DLP) manufactured, and computer numerical control (CNC) milled zirconia to veneering ceramic.Materials and Methods: Rectangular shaped zirconia substrates (10 × 5 × 5 mm3) were manufactured through SLA, DLP, and CNC technology separately. Their surface roughness was measured and the surface topography was analyzed by atomic force microscope (AFM). Then the veneering ceramic (5 × 5 × 5 mm3) was applied to carry out the SBS test. Failure modes were examined by a scanning electron microscope (SEM). The data of SBS and roughness were statistically analyzed with one‐way ANOVA followed by S‐N‐K post hoc comparisons (a = 0.05).Results: The surface roughness of the SLA group (0.38 ± 0.03 µm) and the DLP group (0.37 ± 0.04 µm) were both significantly higher than the CNC group (0.16 ± 0.00 µm) (p < 0.001). AFM results revealed irregular surface of SLA and DLP zirconia. No significant difference was found in SBS value of the three groups (p = 0.253). SEM image showed different failure modes including cohesive, adhesive, and mixed failure.Conclusion: The bonding ability of SLA and DLP zirconia to veneering ceramic were comparable with that of CNC zirconia.Keywords
Funding Information
- Fujian Medical University (2022GXB01)
This publication has 48 references indexed in Scilit:
- Advances and challenges in zirconia-based materials for dental applicationsJournal of the Korean Ceramic Society, 2024
- Clinical outcomes of single crown and 3-unit bi-layered zirconia-based fixed dental prostheses: An upto 6- year retrospective clinical studyJournal of Dentistry, 2022
- Strength and reliability of zirconia fabricated by additive manufacturing technologyDental Materials, 2022
- Dental zirconia fabricated by stereolithography: Accuracy, translucency and mechanical properties in different build orientationsCeramics International, 2021
- Schwickerath adhesion tests of porcelain veneer and stereolithographic additive-manufactured zirconiaCeramics International, 2020
- Glass coatings to enhance the interfacial bond strength between veneering ceramic and zirconiaOdontology, 2020
- Promoting porcelain–zirconia bonding using different atmospheric pressure gas plasmasDental Materials, 2018
- Ten-year survival and chipping rates and clinical quality grading of zirconia-based fixed dental prosthesesClinical Oral Investigations, 2018
- ADM guidance-Ceramics: all-ceramic multilayer interfaces in dentistryDental Materials, 2017
- State of the art of zirconia for dental applicationsDental Materials, 2008