Epoxy resin toughened with thermoplastic
Authors:
- 1 May 1991
- journal article
- research article
- Published by Wiley in Makromolekulare Chemie. Macromolecular Symposia
- Vol. 45 (1) , 289-298
Abstract
Highly crosslinked, brittle epoxy resin based on tètraglycidyl‐4,4′‐diaminodiphenyl methane (TGDDM) cured with 4,4′‐diaminodiphenyl sulphone (DDS) is widely used as a matrix material for aerospace composite applications. This work describes how inclusion of a polyetherimide (PEI) thermoplastic rich phase can significantly toughen the resin without a fall in apparent stiffness, which accompanies the more traditional method of rubber toughening. Dynamic mechanical analysis and scanning electron microscopy are used to characterize morphology, while fracture toughness and flexural modulus measurements are also performed on the cured resins. The extent of toughening is found to be dependent upon PEI concentration and test temperature. It is observed that the PEI rich phase toughens through ductile drawing across the faces of the advancing crack tip, and that this is the dominant toughening mechanism in the material.Keywords
This publication has 5 references indexed in Scilit:
- Toughening tetrafunctional epoxy resins using polyetherimidePolymer, 1989
- Impact-modified epoxy resin with glassy second componentJournal of Materials Science, 1987
- Rubber-modified thermosets: Prediction of the particle size distribution of dispersed domainsPolymer, 1987
- The fracture of hybrid-particulate compositesJournal of Materials Science, 1985
- The fracture of epoxy- and elastomer-modified epoxy polymers in bulk and as adhesivesJournal of Applied Polymer Science, 1975