A Reduced Order Model for Nonlinear Dynamics of Mistuned Bladed Disks With Shroud Friction Contacts
- 23 October 2018
- journal article
- research article
- Published by ASME International in Journal of Engineering for Gas Turbines and Power
- Vol. 141 (1)
Abstract
A new reduced order modeling technique for nonlinear vibration analysis of mistuned bladed disks with shrouds is presented. The developed reduction technique employs two component mode synthesis methods, namely, the Craig-Bampton (CB) method followed by a modal synthesis based on loaded interface (LI) modeshapes (Benfield and Hruda). In the new formulation, the fundamental sector is divided into blade and disk components. The CB method is applied to the blade, where nodes lying on shroud contact surfaces and blade–disk interfaces are retained as master nodes, while modal reductions are performed on the disk sector with LIs. The use of LI component modes allows removing the blade–disk interface nodes from the set of master nodes retained in the reduced model. The result is a much more reduced order model (ROM) with no need to apply any secondary reduction. In the paper, it is shown that the ROM of the mistuned bladed disk can be obtained with only single-sector calculation, so that the full finite element model of the entire bladed disk is not necessary. Furthermore, with the described approach, it is possible to introduce the blade frequency mistuning directly into the reduced model. The nonlinear forced response is computed using the harmonic balance method and alternating frequency/time domain approach. Numerical simulations revealed the accuracy, efficiency, and reliability of the new developed technique for nonlinear vibration analysis of mistuned bladed disks with shroud friction contacts.Keywords
This publication has 27 references indexed in Scilit:
- A Statistical Characterization of the Effects of Mistuning in Multistage Bladed DisksJournal of Engineering for Gas Turbines and Power, 2011
- A reduced order model based on sector mistuning for the dynamic analysis of mistuned bladed disksInternational Journal of Mechanical Sciences, 2011
- Control of vibration and resonance in aero engines and rotating machinery – An overviewInternational Journal of Pressure Vessels and Piping, 2010
- Multiharmonic Forced Response Analysis of a Turbine Blading Coupled by Nonlinear Contact ForcesJournal of Engineering for Gas Turbines and Power, 2010
- Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk VibrationAIAA Journal, 2007
- Modeling and Analysis of Mistuned Bladed Disk Vibration: Current Status and Emerging DirectionsJournal of Propulsion and Power, 2006
- Characteristic Constraint Modes for Component Mode SynthesisAIAA Journal, 2001
- A multiharmonic method for non‐linear vibration analysisInternational Journal for Numerical Methods in Engineering, 1994
- Vibration Analysis of Structures by Component Mode SubstitutionAIAA Journal, 1971
- Coupling of substructures for dynamic analyses.AIAA Journal, 1968