Enhancement Research on Piezoelectric Performance of Electrospun PVDF Fiber Membranes with Inorganic Reinforced Materials
Open Access
Abstract
The electrospun PVDF fiber membranes with the characteristics of light weight, strong signal and measurability, have been widely applied in the fields of environment, energy sensors and biomedical treatment. Due to the weakness of the piezoelectric and service properties, the conventional PVDF fiber membranes cannot meet the operating requirements. Based on the obtained optimal technological parameter of electrospun pure PVDF fiber membranes (P-PVDF) in the previous experiment (unpublished), three inorganic reinforced substances (AgNO3, FeCl3·6H2O, nanographene) were respectively used to dope and modify PVDF to prepare composite fiber membranes with the better piezoelectric performance. The morphology and crystal structure of the hybrid fiber membranes were observed and detected by scanning electron microscopy and X-ray diffraction, respectively. The results showed that the dopant could effectively promote the formation of β-phase, which can enhance the piezoelectric performance. The mechanical properties test and piezoelectric performance test exhibited that the static flexural strength, the elastic modulus, and the piezoelectric performance were improved with the addition of dopant. In addition, the influence on the addition of dopant and the doping modification mechanism were discussed. Finally, the conclusions showed that the minimum average diameter was obtained with the 0.3 wt% addition of AgNO3; the piezoelectric performance reached the strongest with the 0.8 wt% addition of FeCl3·6H2O; the mechanical properties were best with the 1.0 wt% addition of nanographene.Keywords
Funding Information
- high technology ship research project (SSBQ-2020-HN-06-02)
This publication has 21 references indexed in Scilit:
- Enhanced electroactive β-phase of the sonication-process-derived PVDF-activated carbon composite film for efficient energy conversion and a battery-free acceleration sensorJournal of Materials Chemistry C, 2017
- Influence of processing conditions on polymorphic behavior, crystallinity, and morphology of electrospun poly(VInylidene fluoride) nanofibersJournal of Applied Polymer Science, 2015
- Imaging the Effects of Annealing on the Polymorphic Phases of Poly(vinylidene fluoride)The Journal of Physical Chemistry B, 2015
- A Single‐Electrode Based Triboelectric Nanogenerator as Self‐Powered Tracking SystemAdvanced Materials, 2013
- Enhanced Piezoelectric Properties of Electrospun Poly(vinylidene fluoride)/Multiwalled Carbon Nanotube Composites Due to High β-Phase Formation in Poly(vinylidene fluoride)The Journal of Physical Chemistry C, 2013
- Effect of Annealing Temperature on the Morphology and Piezoresponse Characterisation of Poly(vinylidene fluoride-trifluoroethylene) Films via Scanning Probe MicroscopyAdvances in Condensed Matter Physics, 2013
- Piezoelectric Energy Harvesting Devices: An Alternative Energy Source for Wireless SensorsSmart Materials Research, 2012
- Pyroelectric Nanogenerators for Harvesting Thermoelectric EnergyNano Letters, 2012
- On the origin of the electroactive poly(vinylidene fluoride) β-phase nucleation by ferrite nanoparticles via surface electrostatic interactionsCrystEngComm, 2012
- Effect of tensile strain rate and elongation on crystalline structure and piezoelectric properties of PVDF thin filmsPolymer Testing, 2007