Simplified estimation of unsaturated soil hydraulic conductivity using bulk electrical conductivity and particle size distribution
- 1 March 2013
- journal article
- research article
- Published by CSIRO Publishing in Soil Research
- Vol. 51 (1) , 23-33
Abstract
Unsaturated soil hydraulic conductivity K is a fundamental transfer property of soil but its measurement is costly, difficult, and time-consuming due to its large variations with water content (?) or matric potential (h). Recently, C. Doussan and S. Ruy proposed a method/model using measurements of the electrical conductivity of soil core samples to predict K(h). This method requires the measurement or the setting of a range of matric potentials h in the core samples—a possible lengthy process requiring specialised devices. To avoid h estimation, we propose to simplify that method by introducing the particle-size distribution (PSD) of the soil as a proxy for soil pore diameters and matric potentials, with the Arya and Paris (AP) model. Tests of this simplified model (SM) with laboratory data on a broad range of soils and using the AP model with available, previously defined parameters showed that the accuracy was lower for the SM than for the original model (DR) in predicting K (RMSE of logK = 1.10 for SM v. 0.30 for DR; K in m s–1). However, accuracy was increased for SM when considering coarse- and medium-textured soils only (RMSE of logK = 0.61 for SM v. 0.26 for DR). Further tests with 51 soils from the UNSODA database and our own measurements, with estimated electrical properties, confirmed good agreement of the SM for coarse–medium-textured soils (<35–40% clay). For these textures, the SM also performed well compared with the van Genuchten–Mualem model. Error analysis of SM results and fitting of the AP parameter showed that most of the error for fine-textured soils came from poorer adequacy of the AP model’s previously defined parameters for defining the water retention curve, whereas this was much less so for coarse-textured soils. The SM, using readily accessible soil data, could be a relatively straightforward way to estimate, in situ or in the laboratory, K(h) for coarse–medium-textured soils. This requires, however, a prior check of the predictive efficacy of the AP model for the specific soil investigated, in particular for fine-textured/structured soils and when using previously defined AP parameters.Keywords
This publication has 25 references indexed in Scilit:
- Predicting the Soil Moisture Characteristic Curve from Particle Size Distribution with a Simple Conceptual ModelVadose Zone Journal, 2011
- Prediction of unsaturated soil hydraulic conductivity with electrical conductivityWater Resources Research, 2009
- Interfacial area based variable tortuosity‐connectivity for unsaturated media: A comparison using Miller–Miller scaling and Arya–Paris modelWater Resources Research, 2008
- Variations of self-potential and unsaturated water flow with time in sandy loam and clay loam soilsJournal of Hydrology, 2002
- Scaling Parameter to Predict the Soil Water Characteristic from Particle‐Size Distribution DataSoil Science Society of America Journal, 1999
- Quantitative prediction of permeability in porous rockPhysical Review B, 1986
- A Physicoempirical Model to Predict the Soil Moisture Characteristic from Particle‐Size Distribution and Bulk Density DataSoil Science Society of America Journal, 1981
- A new model for predicting the hydraulic conductivity of unsaturated porous mediaWater Resources Research, 1976
- A SIMPLE METHOD FOR DETERMINING UNSATURATED CONDUCTIVITY FROM MOISTURE RETENTION DATASoil Science, 1974
- Calculation of Capillary Conductivity from Pressure Plate Outflow DataSoil Science Society of America Journal, 1956