Emissions of industrial furnaces burning with sodium sulfate containing fuel oils
Authors:
- 1 May 1998
- journal article
- research article
- Published by Taylor & Francis in Journal of Environmental Science and Health, Part A
- Vol. 33 (4) , 621-634
Abstract
Diesel fuel oil A, which approximates ASTM No. 2D oil was used as the test oil to investigate the influences of the content of sodium sulfate in diesel oils on the combustion and emission characteristics of industrial furnaces. An emulsifying and homogenizing machine was employed to stir the Na2SO4 powder and the oil to constitute a homogeneous oil mixture. The oil mixture was there after injected by an oil pump of a small‐sized industrial burner, atomized with inlet air, and burned within a furnace made of stainless steel 316 in turn. The results show that the existence of sodium sulfate in the oil would incur a less extent of chemical reaction, leading to decreased heat release, a lower attainable gas temperature and a lower combustion efficiency. In contrast, the concentrations of excess oxygen, carbon monoxide in the combustion products increased with the existence of sodium sulfate. Larger formations of sulfur dioxide and carbon dioxide were also observed. In addition, the existence of sodium sulfate resulted in lower nitrogen oxides emission probably due to both the lower burning gas temperature and the larger suppression effect of SO2.Keywords
This publication has 7 references indexed in Scilit:
- Emissions of industrial furnaces burning vanadium‐contained heavy oilsJournal of Environmental Science and Health . Part A: Environmental Science and Engineering and Toxicology, 1995
- Fundamental aspects of oxidation, sulfidation, chloridation and carburization in the gasifier environmentMaterials at High Temperatures, 1993
- Toxic metal emissions from incineration: Mechanisms and controlProgress in Energy and Combustion Science, 1993
- Effects of SO2 and SO3 on the Na2SO4 induced corrosion of nickelOxidation of Metals, 1984
- Extinction phenomenon of premixed flames with alkali metal compoundsCombustion and Flame, 1984
- In-situ optical measurement of additive effects on particulates in a sooting diffusion flameCombustion and Flame, 1983
- The deposition of salts from hydrocarbon flames containing sodium and sulphur speciesCombustion and Flame, 1977