The influence of filler type on the separation properties of mixed-matrix membranes
Open Access
- 15 December 2017
- journal article
- research article
- Published by Springer Nature in Chemical Papers
- Vol. 72 (5) , 1095-1105
Abstract
Chitosan-based membranes filled with different metal oxide particles were prepared and their performance in ethanol dehydration process depending on the type of oxide and loading was discussed. For membrane preparation three oxides: TiO2, Cr2O3 or Fe3O4 were selected. From experimental data suitable ethanol and water transport coefficients were evaluated. As shown in the results, applied fillers in different ways affect the separation properties. Presence of TiO2 significantly affects the normalized total flux, increasing its value. On the other hand, addition of Fe3O4 influences most of all the separation factor, which is the among all investigated membranes. For membranes containing chromium(III) oxide as a filler, improvement in the separation properties is observed only in the case when the Cr2O3 content equals to 5 wt%. Above this concentration significant deterioration of separation properties is observed. The best performance has mixed-matrix membranes (MMMs) with magnetite, where the values of PSI are equal to 16.3 and 296.8 kg/m−2 h µm for pristine and 15 wt% filler content, respectively.Keywords
This publication has 45 references indexed in Scilit:
- A review of membrane selection for the dehydration of aqueous ethanol by pervaporationChemical Engineering and Processing - Process Intensification, 2011
- Mixed matrix membranes prepared from poly(vinyl alcohol) (PVA) incorporated with zeolite 4A-graft-poly(2-hydroxyethyl methacrylate) (zeolite-g-PHEMA) for the pervaporation dehydration of water–acetone mixturesJournal of Membrane Science, 2011
- Application of chitosan, a natural aminopolysaccharide, for dye removal from aqueous solutions by adsorption processes using batch studies: A review of recent literatureProgress in Polymer Science, 2008
- Maleic anhydride surface-modification of crosslinked chitosan membrane and its pervaporation performanceJournal of Membrane Science, 2007
- Novel dense poly(vinyl alcohol)–TiO2 mixed matrix membranes for pervaporation separation of water–isopropanol mixtures at 30°C☆Journal of Membrane Science, 2006
- Dehydration of ethanol through blend membranes of chitosan and sodium alginate by pervaporationSeparation and Purification Technology, 2004
- Pervaporation with chitosan/hydroxyethylcellulose (CS/HEC) blended membranesJournal of Membrane Science, 2000
- The effect of structure on pervaporation of chitosan membraneJournal of Membrane Science, 2000
- Fracture behavior and fracture toughness of particulate filled epoxy compositesMaterials Letters, 1996
- Permeation and separation characteristics of ethanol-water mixtures through chitosan derivative membranes by pervaporation and evapomeationPolymer, 1990