Microchip based sample treatment device interfaced with ICP-MS for the analysis of transition metals from environmental samples
Open Access
- 1 July 2010
- journal article
- Published by Scientific Scholar in Arabian Journal of Chemistry
- Vol. 4 (2) , 195-203
Abstract
A downscaled solid phase (SPE) device applicable for sample preparation prior to ICP-MS monitoring, have been constructed making use of the lab on a chip concept. Standard photolithography and wet chemical etching were used to fabricate glass microfluidic devices accommodating three microchannels, each of them incorporating a defined section that could be packed with SPE materials; selective chelating resin. The microfluidic device was interfaced with the ICP-MS instrument throughout a low flow rate concentric nebuliser using a Teflon connector, and coupled with a flow injection manifold delivering samples and reagents via a manually operated splitting valve. The feasibility of the miniaturized prototype to perform SPE of trace metals was proved by analyzing trace metals, Cd, Co, and Ni, in seawater reference materials; CASS-2 and SLEW-1. The obtained result was in good agreement with the certified values. The device could be used as a remote miniaturized sample treatment for field work.Keywords
This publication has 24 references indexed in Scilit:
- On-line solid phase extraction coupled to ICP-OES for simultaneous preconcentration and determination of some transition elementsMicrochimica Acta, 2008
- Field sampling system for determination of cadmium and nickel in fresh water by flame atomic absorption spectrometryJournal of the Brazilian Chemical Society, 2005
- Interfacing a microfluidic electrophoresis chip with inductively coupled plasma mass spectrometry for rapid elemental speciationJournal of Analytical Atomic Spectrometry, 2004
- Microfabricated bioreactor chips for immobilised enzyme assaysAnalytica Chimica Acta, 2003
- Selective solid phase extraction and preconcentration of iron(III) based on silica gel-chemically immobilized purpurogallinAnalytica Chimica Acta, 2001
- Rapid prototyping of glass and PDMS microstructures for micro total analytical systems and micro chemical reactors by microfabrication in the general laboratoryAnalytica Chimica Acta, 2001
- Field sampling, preconcentration and determination of mercury species in river watersAnalytica Chimica Acta, 2000
- Field Preconcentration of Trace Metals from Seawater and Brines Coupled with Laboratory Analysis Using Flow Injection and ICP-AES DetectionInternational Journal of Environmental Analytical Chemistry, 1999
- Sorbent extraction in flow injection analysis and its application to enhancement of atomic spectrometryAnalytica Chimica Acta, 1989
- Flow injection analysesAnalytica Chimica Acta, 1975