PEO-Reinforced Hydrogel-Forming PVA Nanofibrous Mats Prepared by Coaxial Electrospinning: A Physicochemical Basis for Biomedical Evaluation

Authors:

Abstract
Electrospun hydrogel-forming nanofibrous mats are attractive for wound-interface and soft-tissue applications, yet mechanical fragility and poor handling often limit translation. We report an aqueous, mildly acidic coaxial electrospinning strategy to fabricate a core–shell mat with a ductile poly(ethylene oxide) (PEO) core and an acetoacetyl-functionalized poly(vinyl alcohol) (PVA) sheath crosslinked with sodium glyoxylate. The acetoacetyl/aldehyde reaction is proposed to generate stable ring-type covalent bridges in the PVA network. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) confirm fibers with clear core–shell architecture, while Fourier transform IR and X-ray diffraction (XRD) support formation of a stabilized hydrogel-forming PVA sheath and strong interpolymer interactions. The coaxial mat exhibits an ultimate tensile strength (UTS)/Young’s modulus of 12.65/35.5 MPa compared with 7.63/133.0 MPa for crosslinked PVA and 7.64/17.8 MPa for neat PVA, respectively. Thus, the composite combines higher tensile strength than both PVA controls with intermediate stiffness—substantially softer than crosslinked PVA yet stiffer than neat PVA. Its elongation at break and toughness (53% strain, 5.2 MJ m−3) are lower than in neat PVA but comparable to crosslinked PVA, reflecting a strength–ductility trade-off. The mat retains hydrogel integrity after water exposure (swelling ratio ~ 5; gel content ~ 59%), and nitrogen sorption reveals mesoporosity with Brunauer–Emmett–Teller (BET) surface area of ~ 8 m2 g–1 and average pore diameter of ~ 8 nm. Thermogravimetric analysis shows a broadened intermediate degradation region for the coaxial mat. Overall, integrating a hydrophilic PEO core within a crosslinked PVA sheath enhances the dry state tensile strength of electrospun hydrogel-forming mat while preserving hydration and mesoporosity upon wetting, supporting further optimization for wound dressings.