Effect of Slurry pH and H2O2on Polycrystalline Ge2Sb2Te5CMP Performance
Authors:
- 1 January 2012
- journal article
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 159 (11) , C546-C551
Abstract
How pH and hydrogen peroxide (H2O2) in colloidal silica-based slurry affect chemical mechanical planarization of polycrystalline Ge2Sb2Te5 (pc-GST) film has been investigated. The polishing rate of pc-GST film increased when the slurry pH decreased or increased from neutral pH. In addition, pc-GST polishing rate was highly affected by adding H2O2, resulting in a high pc-GST polishing rate in the entire pH ranging from 2 to 11. However, a noticeable difference in surface roughness of pc-GST film polished was observed between acidic (pH 2) and alkaline (pH 11) regions. Low RMS of roughness as well as a high polishing rate of pc-GST film was obtained in the acidic pH region with 1wt% H2O2. In contrast, in the alkaline region a high RMS of roughness of pc-GST film was observed owing to enhanced selective corrosion between Ge, Sb, and Te elements. To investigate the different polishing behavior of pc-GST film between acidic and alkaline pH regions, surface characteristics of pc-GST film dipped in acidic or alkaline media were observed by scanning electron microscopy, X-ray photoelectron microscopy, and potentiodynamic measurement.Keywords
This publication has 10 references indexed in Scilit:
- Mechanism of Ge2Sb2Te5 chemical mechanical polishingApplied Surface Science, 2012
- Chemical Mechanical Planarization Mechanism for Nitrogen-Doped Polycrystalline Ge2Sb2Te5 Film Using Nitric Acidic Slurry Added with Hydrogen PeroxideJournal of the Electrochemical Society, 2011
- Role of Hydrogen Peroxide in Alkaline Slurry on the Polishing Rate of Polycrystalline Ge[sub 2]Sb[sub 2]Te[sub 5] Film in Chemical Mechanical PolishingElectrochemical and Solid-State Letters, 2010
- Acid and Surfactant Effect on Chemical Mechanical Polishing of Ge[sub 2]Sb[sub 2]Te[sub 5]Journal of the Electrochemical Society, 2009
- Oxidant Addition Effect on Ge[sub 2]Sb[sub 2]Te[sub 5] Phase Change Film Chemical Mechanical PolishingJournal of the Electrochemical Society, 2008
- Amorphous-to-crystal transition of nitrogen- and oxygen-doped Ge2Sb2Te5 films studied by in situ resistance measurementsApplied Physics Letters, 2004
- Chemical mechanical polishing of nickel for applications in MEMS devicesMicroelectronic Engineering, 2004
- Localized corrosion effects and modifications of acidic and alkaline slurries on copper chemical mechanical polishingApplied Surface Science, 2003
- Material removal mechanism in chemical mechanical polishing: theory and modelingIEEE Transactions on Semiconductor Manufacturing, 2001
- Crystal Structure and Microstructure of Nitrogen-Doped Ge2Sb2Te5 Thin FilmJapanese Journal of Applied Physics, 2000