Reconfigurable Laser-Stimulated Lock-In Thermography for Surface Micro-Crack Detection
Open Access
Abstract
Surface crack detection and sizing is essential for the manufacturing and maintenance of engines, run parts, and other metal elements of aircrafts. Among various non-destructive detection methods, the fully non-contact and non-intrusive technique based on laser-stimulated lock-in thermography (LLT) has recently attracted a lot of attention from the aerospace industry. We propose and demonstrate a system of reconfigurable LLT for three-dimensional surface crack detection in metal alloys. For large area inspection, the multi-spot LLT can speed up the inspection time by a factor of the number of spots. The minimum resolved size of micro-holes is ~50 µm in diameter limited by the magnification of the camera lens. We also study the crack length ranging from 0.8 to 3.4 mm by varying the modulation frequency of LLT. An empirical parameter related to the thermal diffusion length is found to show the linear dependence with the crack length. With the proper calibration, this parameter can be used to predict the sizing of the surface fatigue cracks. Reconfigurable LLT allows us to quickly locate the crack position and accurately measure its dimensions. This method is also applicable to the non-destructive detection of surface or sub-surface defect in other materials used in various industries.Keywords
Funding Information
- Aerospace Cycle 9 (1521500067)
This publication has 17 references indexed in Scilit:
- Multi-spot laser lock-in thermography for real-time imaging of cracks in semiconductor chips during a manufacturing processJournal of Materials Processing Technology, 2016
- Fatigue Crack Length Sizing Using a Novel Flexible Eddy Current Sensor ArraySensors, 2015
- Line laser lock-in thermography for instantaneous imaging of cracks in semiconductor chipsOptics and Lasers in Engineering, 2015
- Open crack depth sizing by laser stimulated infrared lock-in thermographyJournal of Physics D: Applied Physics, 2014
- Vertical cracks characterization using lock-in thermography: II finite cracksMeasurement Science and Technology, 2014
- Vertical cracks characterization using lock-in thermography: I infinite cracksMeasurement Science and Technology, 2014
- Infrared Lock-in Thermography Crack Localization on Metallic Surfaces for Industrial DiagnosisJournal of Nondestructive Evaluation, 2013
- Heat transfer modeling for surface crack depth evaluationMeasurement Science and Technology, 2013
- Resolution enhancement of ultrasonic defect signals for crack sizingNDT & E International, 2012
- Dye Impregnation Method for Revealing Machining Crack GeometryJournal of the American Ceramic Society, 2001