Experimental Investigations of Cavitation Characteristics of Pump Running in Turbine Mode
- 1 February 2017
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in Journal of Energy Engineering
- Vol. 143 (1)
Abstract
When a pump is running in turbine mode, susceptibility to cavitation increases, and it may be more severe than that in conventional hydro turbines. To accomplish the basic aim of making a compact machine with a high setting, a certain amount of cavitation can be allowed, then the erosion risk may be predicted. In the present study, experimental investigations were carried out on cavitation characteristics of a pump running in turbine mode in the nondimensional speed ( ) range of 0.64–1.07. For cavitation analysis, an additional suction creation system was installed, and different techniques were applied for cavitation detection viz pressure measurement, visual inspection, and vibration analysis. The performance of pump as turbine was found better in the of 0.71–0.86 in terms of higher efficiency and lesser possibility of cavitation. From the sigma test, the critical value of was found as 0.595. The study revealed that, when a pump is operated as a turbine, it might be suffering from traveling bubble and von Karman vortex cavitation near impeller blades and vortex rope cavitation in the draft tube.
Keywords
This publication has 18 references indexed in Scilit:
- Numerical Analysis of Cavitation Phenomenon in a Vaned Ring-Type Needle ValveJournal of Energy Engineering, 2015
- Effects of impeller diameter and rotational speed on performance of pump running in turbine modeEnergy Conversion and Management, 2015
- Estimating uncertainty of measurements for cavitation detection in a centrifugal pumpMeasurement, 2011
- Using Vibration Signatures Analysis to Detect Cavitation in Centrifugal Pumps2011
- Use of audible sound for safe operation of kinetic pumpsInternational Journal of Mechanical Sciences, 2008
- Detection of cavitation in hydraulic turbinesMechanical Systems and Signal Processing, 2006
- Performance of a centrifugal pump running in inverse modeProceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2004
- Turbomachinery2003
- Cavitation Erosion Prediction on Francis Turbines-Part 1 Measurements on the Prototype1996
- Cavitation in Fluid Machinery and Hydraulic StructuresAnnual Review of Fluid Mechanics, 1981