Effect of mechanical damage under repeated loading and abrasion on the tensile behaviour of a reinforcement geocomposite
Authors:
Open Access
- 1 October 2022
- conference paper
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 1260 (1)
Abstract
The installation process and the occurrence of abrasion may cause unwanted changes on the properties of the geosynthetics. When identified as relevant degradation agents for a given application, their effect has to be properly taken into account during the design phase in order to guarantee that the geosynthetics will perform correctly their functions over time. In this work, a reinforcement geocomposite (formed by a nonwoven polypropylene geotextile reinforced with polyethylene terephthalate filaments) was exposed to the isolated and combined effects of two degradation tests: mechanical damage under repeated loading and abrasion (the geocomposite was tested on both sides, which were structurally different). Damage assessment was performed by visual inspection and tensile tests. Based on the changes occurred in tensile strength, reduction factors were determined. The degradation tests provoked extensive damage on the geocomposite, having a negative impact on its tensile behaviour. Contrary to mechanical damage under repeated loading, the effect of abrasion on the geocomposite was influenced by the side that was tested. Finally, some differences were found between the reduction factors determined by the traditional method (multiplication of reduction factors obtained in isolation for each agent) for the combined effect of mechanical damage under repeated loading and abrasion and those resulting from the successive exposure to both degradation agents.Keywords
This publication has 12 references indexed in Scilit:
- Resistance of a nonwoven geotextile against mechanical damage and abrasionCiência & Tecnologia dos Materiais, 2017
- Effect of Soil Grain Size Distribution on the Mechanical Damage of Nonwoven Geotextiles Under Repeated LoadingInternational Journal of Geosynthetics and Ground Engineering, 2015
- Some synergisms in the laboratory degradation of a polypropylene geotextileConstruction and Building Materials, 2014
- Tensile properties of geosynthetics after installation damageEnvironmental Geotechnics, 2014
- Tensile and hydraulic properties of geosynthetics after mechanical damage and abrasion laboratory testsGeosynthetics International, 2013
- Evaluation of the Damages Occurred During the Installation of Non-Woven GeotextilesMaterials Science Forum, 2012
- Installation damage of geogrids: influence of load intensityGeosynthetics International, 2007
- Laboratory simulation of installation damage of a geogridGeosynthetics International, 2006
- The Effect of Installation Damage on the Long-Term Design Strength of a Reinforcing GeosyntheticGeosynthetics International, 2002
- Characterization of Geosynthetic Load-Strain Behavior After Installation DamageGeosynthetics International, 1994