The effect of mineral fillers on the thermal properties of wood-plastic composites
- 18 April 2012
- journal article
- research article
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 7 (2) , 107-114
Abstract
The thermal properties of wood-plastic composites with five different mineral fillers were studied. The tested mineral fillers were calcite (CaCO3), two different qualities of wollastonite, soapstone, and talc. The amount of wood, mineral, and plastic (polypropylene) was kept constant. Only the mineral type has been changed during the tests. The thermal behavior of the samples was studied by using a differential scanning calorimeter, a thermogravimetric analyzer and by determining the heat build-up. The analyzed properties were compared with a reference sample made without adding any minerals. The results show that the addition of mineral fillers does not remarkably change the thermal stability of composites. All the studied mineral fillers except soapstone had a small effect on the heat build-up.Keywords
This publication has 12 references indexed in Scilit:
- Mineral fillers for wood–plastic compositesWood Material Science & Engineering, 2010
- Thermal and Mechanical Properties of Wood Flour/Talc-filled Polylactic Acid Composites: Effect of Filler Content and Coupling TreatmentJournal of Thermoplastic Composite Materials, 2008
- Infrared Reflective Inorganic PigmentsRecent Patents on Chemical Engineeringe, 2008
- Some of the properties of wood–plastic compositesBuilding and Environment, 2007
- Determination of nucleating ability ofwood for non-isothermal crystallisation of polypropyleneJournal of Thermal Analysis and Calorimetry, 2007
- Wood‐Plastic Composites2007
- USGS Digital Spectral Library splib06a2007
- Compositional analysis of thermoplastic wood composites by TGAJournal of Applied Polymer Science, 2004
- Estimation of the physical wood properties of green Pinus taeda radial samples by near infrared spectroscopyCanadian Journal of Forest Research, 2003
- Carbonization of wood for advanced materials applicationsCarbon, 1997