3D printed object’s strength-to-weight ratio analysis for M3 liquid material
- 20 December 2020
- journal article
- research article
- Published by Taylor & Francis in Advances in Materials and Processing Technologies
- Vol. 8 (2) , 1610-1624
Abstract
3D printing processes have been used in different applications. Complex products are fabricated without tooling faster compared to conventional processes. Many ways have been proposed to evaluate the strength and stiffness of plastics, for example, tensile tests, fatigue behaviour, and crack propagation. Finite element analysis (FEA) is a way to evaluate the sample’s strength in various situations. This paper investigated the capability of the Polyjet process and features’ effects on a product’s strength. It was found that complex parts with high accuracy and good mechanical properties were achievable by using liquid as a base material in the Polyjet process. Porous cubes were analysed to identify the influence of features, e.g. fillets, holes, and curves on mechanical properties. VisiJet M3 liquid material was used in this research, and a comparison was obtained between computer-aided engineering (CAE) simulation and laboratory experiment. Compression tests were conducted on porous cubes, and the results showed that the strength-to-weight ratio difference between simulation and experimental processes was 7.5%. The samples showed different behaviours under compression tests due to the different geometric dimensions. Thus, there was a correlation between weight and strength conducted by design optimisation, where maximum strength was achieved when the product weighed the least.Keywords
Funding Information
- Universiti Putra Malaysia (GP-IPS/953200)
This publication has 36 references indexed in Scilit:
- A review on 3D micro-additive manufacturing technologiesThe International Journal of Advanced Manufacturing Technology, 2012
- Inkjet printing of conductive materials: a reviewCircuit World, 2012
- Additive manufacturing and its societal impact: a literature reviewThe International Journal of Advanced Manufacturing Technology, 2012
- Developments in construction-scale additive manufacturing processesAutomation in Construction, 2012
- Applications2011
- History of Stereolithographic Processes2011
- Mechanical properties of parts produced by using polymer jetting technologyArchives of Civil and Mechanical Engineering, 2010
- Investigation of the mechanical properties and porosity relationships in fused deposition modelling‐fabricated porous structuresRapid Prototyping Journal, 2006
- A comparison of rapid prototyping technologiesInternational Journal of Machine Tools and Manufacture, 1998
- Progress in Additive Manufacturing and Rapid PrototypingCIRP Annals, 1998