Evolution of the peroxide‐induced degradation of polypropylene along a twin‐screw extruder: Experimental data and theoretical predictions
- 6 December 2005
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 99 (5) , 2082-2090
Abstract
This article reports an experimental and theoretical study of the peroxide‐induced degradation of polypropylene in a corotating twin‐screw extruder. Experiments were performed with different peroxide concentrations and different operating conditions. The evolution of the chemical reaction along the extruder was monitored with specific sampling devices. Material changes were characterized by rheological measurements and via the determination of the molecular weights of samples collected at the same locations. The theoretical results were obtained with a model that coupled the interactions between flow conditions encountered in the extruder, the kinetics of the reaction, and the changes in the viscosity induced by changes in the molecular weight. The experimental results evidenced the relationships between the process conditions (peroxide concentration and processing parameters) and material properties (rheological properties and molecular structure of the modified polypropylene). Good agreement between the theoretical and experimental results was obtained. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006Keywords
This publication has 17 references indexed in Scilit:
- Heterogeneous Composition and Microstructure of Elastomeric Polypropylene from a Sterically Hindered 2-Arylindenylhafnium CatalystMacromolecules, 2004
- Evolution of peroxide‐induced thermomechanical degradation of polypropylene along the extruderJournal of Applied Polymer Science, 2003
- Monitoring polyolefin modification along the axis of a twin screw extruder. I. Effect of peroxide concentrationJournal of Applied Polymer Science, 2001
- Rheological behavior of controlled‐rheology polypropylenes obtained by peroxide‐promoted degradation during extrusion: Comparison between homopolymer and copolymerJournal of Applied Polymer Science, 2001
- Simulation of thermal degradation, peroxide induced degradation, and maleation of polypropylene in a modular co‐rotating twin screw extruderPolymer Engineering & Science, 1997
- Parameters affecting process efficiency of peroxide‐initiated controlled degradation of polypropyleneAdvances in Polymer Technology, 1991
- Controlled Degradation of Polypropylene: A Comprehensive Experimental and Theoretical InvestigationPolymer-Plastics Technology and Engineering, 1989
- Reactive extrusion of polypropylene I: Controlled degradationJournal of Applied Polymer Science, 1988
- Reactive extrusion of polypropylene II: Degradation kinetic modelingJournal of Applied Polymer Science, 1988
- Production of controlled‐rheology polypropylene resins by peroxide promoted degradation during extrusionPolymer Engineering & Science, 1988