The voltage stresses of insulation systems under PWM inverter supplies
Authors:
- 1 August 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 00849162,p. 372-375
Abstract
Exploitation stresses are causing degradation of high voltage insulation systems. The assessment of intensity and dynamics of these processes, being a consequence of local, working electric field strength is considered mainly at the sinusoidal voltage. However in applications where power electronics converters are used the voltage stress has usually a form of fast switching pulses composed of repetitive sequences. Such pulse trains pose usually a modulated width and fast rise-and fall-times. Such conditions have essential influence on inception and development of partial discharges in insulating systems subjected to non-sinusoidal stimulus. The insulation degradation mechanism is especially important for cables and electrical machines subjected to non-sinusoidal waveforms. A novel time-resolved partial discharge (PD) surge pulse acquisition has been described. The method is based on very fast PD registration during repetition of HV surge pulses on insulating material and visualization if form of PRPD like pattern. Comparison between PD patterns obtained at surge pulse and subjected to power frequency sine and trapezoidal is shown.Keywords
This publication has 6 references indexed in Scilit:
- Electrical Aging Phenomena of XLPE and EPR Cable Insulation Energized by Switching Impulses2008
- Insulation Problems in Medium-Voltage Stator Coils Under Fast Repetitive Voltage PulsesIEEE Transactions on Industry Applications, 2008
- Analysis of conditions of partial discharges inception and development at non-sinusoidal testing voltages2006
- A study about partial discharge measurements performed applying to insulating systems square voltages with different rise times2005
- Relation between space charge accumulation and partial discharge activity in enameled wires under PWM-like voltage waveformsIEEE Transactions on Dielectrics and Electrical Insulation, 2004
- Electrical stress and failure mechanism of the winding insulation in PWM-inverter-fed low-voltage induction motorsIEEE Transactions on Industrial Electronics, 2000