Study of Al–SiO2 Aesthetic Composite Coating on Orthodontic Metal Archwire
Open Access
Abstract
Nickel–titanium orthodontic wires (NTWs) play an essential role in orthodontic treatment. However, their corrosion and aesthetic properties limit their applications. To improve the aesthetic effects of nickel–titanium orthodontic archwires, we prepared aluminium–silicon dioxide (Al–SiO2) as a biocompatible layer coated onto the NTWs. The Al–SiO2 coating was first fabricated using physical vapor deposition magnetron sputtering, and its physicochemical and biocompatibility properties were investigated. Al–SiO2 layers were well coated on the NTWs. The corrosion currents in the nickel–titanium (NiTi) control, Al–SiO2-coated NiTi experimental, stainless steel (SS) control and Al–SiO2-coated SS experimental groups were 23.72 μA cm−2, 1.21 μA cm−2, 0.22 μA cm−2 and 0.06 μA cm−2, respectively. Al–SiO2-coated NTWs with reduced corrosion current density indicated that the preparation of Al–SiO2 coating on the surface of NiTi and SS could reduce the tendency of electrochemical corrosion. The friction coefficients of orthodontic wires in the NiTi control, NiTi experimental, SS control, and SS experimental groups were 0.68, 0.46, 0.58 and 0.45, respectively. A low friction coefficient was observed in the Al–SiO2-coated NTWs, and the reduced friction coefficient improved the efficiency of orthodontics. Furthermore, the excellent biocompatibility of the NTWs and SS coated with Al–SiO2 indicates that Al–SiO2 as a novel aesthetic layer could improve the physicochemical properties of NTW and SS without causing cytotoxicity, which has considerable potential for modification of NTW and SS surfaces.Keywords
Funding Information
- Shenyang Young and middle-aged Scientific and technological Innovation Talents Support Program (RC210001, 2020JH2/10300038, 20-205-4-099)
- Liaoning province key research and development guidance plan project (RC210001, 2020JH2/10300038, 20-205-4-099)
- Shenyang Science and Technology Project (RC210001, 2020JH2/10300038, 20-205-4-099)
This publication has 41 references indexed in Scilit:
- Effect of ion-implantation on surface characteristics of nickel titanium and titanium molybdenum alloy arch wiresIndian Journal of Dental Research, 2013
- Evaluation of surface roughness of orthodontic wires by means of atomic force microscopyThe Angle Orthodontist, 2012
- Development and evaluation of two PVD-coated β-titanium orthodontic archwires for fluoride-induced corrosion protectionActa Biomaterialia, 2011
- Static frictional force and surface roughness of various bracket and wire combinationsAmerican Journal of Orthodontics and Dentofacial Orthopedics, 2011
- Laboratory test simulation of aluminium cold forming – influence from PVD tool coatings on the tendency to gallingSurface and Coatings Technology, 2010
- Initiated and oxidative chemical vapor deposition: a scalable method for conformal and functional polymer films on real substratesPhysical Chemistry Chemical Physics, 2009
- Influence of surface topography of arc-deposited TiN and sputter-deposited WC/C coatings on the initial material transfer tendency and friction characteristics under dry sliding contact conditionsSurface and Coatings Technology, 2009
- Evaporated-gas-induced splashing model for splat formation during plasma sprayingSurface and Coatings Technology, 2004
- Thin Film Synthesis by Energetic CondensationAnnual Review of Materials Research, 2001
- Pulsed magnetron sputter technologySurface and Coatings Technology, 1993