A CMOS temperature sensor with calibration function using band gap voltage reference
Authors:
- 1 November 2008
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 87 (21568065) , 496-499
Abstract
In this paper, an accurate temperature sensor was implemented using 0.18 mum CMOS technology. The temperature sensor which was designed with the bandgap reference circuit is calibrated by trimming common mode voltage of an operational amplifier. The temperature sensor can compensate for other blocks of the IC chip above the special temperature when the ADC was a power off for low power operation. It consumes only 365 muA with a 3 V supply voltage. This temperature sensor can be calibrated up to a maximum 7 degree. And the average error is -0.8degC in sensing range from -30degC to 90degC in comparison with simulation result.Keywords
This publication has 6 references indexed in Scilit:
- Observation of high-frequency analog/RF electrical circuit characteristics by on-chip thermal measurements2006
- CMOS smart temperature sensors - an overview2003
- Temperature sensors and voltage references implemented in CMOS technologyIEEE Sensors Journal, 2001
- The temperature characteristics of bipolar transistors fabricated in CMOS technologySensors and Actuators A: Physical, 2000
- A switched-current, switched-capacitor temperature sensor in 0.6-μm CMOSIEEE Journal of Solid-State Circuits, 1998
- A new NMOS temperature-stable voltage referenceIEEE Journal of Solid-State Circuits, 1978