An investigative study of the interface heat transfer coefficient for finite element modelling of high-speed machining
Authors:
- P T MativengaPMP T Mativenga
- M A SheikhMSM A Sheikh
- 1 November 2008
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
- Vol. 222 (11) , 1405-1416
Abstract
This paper is concerned with the development of an experimental set-up and finite element (FE) modelling of dry sliding of metals to estimate the interface heat transfer coefficient. Heat transfer between the chip, the tool, and the environment during the metal-machining process has an impact on the temperatures and on the wear mechanisms, and hence on the tool life and on the accuracy of the machined component. For modelling of the metal-machining process, the interface heat transfer coefficient is an important input parameter to quantify the transfer of heat between the chip and the tool and to predict the temperature distribution accurately within the cutting tool. In previous studies involving FE analysis of the metal-machining process, the heat transfer coefficient has been assumed to be between 10 kW/m2 °C and 100 000 kW/m2 °C, with a background from metal-forming processes (especially forging). Based on the operating characteristics, metal-forming and metal-machining processes are different in nature. Hence there was a need to develop a procedure close to the metal-machining process, to estimate this parameter in order to increase the reliability of FE models. To this end, an experimental set-up was developed in which an uncoated cemented carbide pin was rubbed against a steel workpiece while the later was rotated at speeds similar to the cutting tests. This modified pin-on-disc set-up was equipped with temperature and force-monitoring equipment. An FE model was constructed for heat generation and frictional contact. The experimental and modelling results of the dry sliding process yield the interface heat transfer coefficient for a range of rubbing speeds.Keywords
This publication has 35 references indexed in Scilit:
- Tool wear when turning hardened AISI 4340 with coated PCBN tools using finishing cutting conditionsInternational Journal of Machine Tools and Manufacture, 2007
- The influence of friction models on finite element simulations of machiningInternational Journal of Machine Tools and Manufacture, 2006
- 2D FEM estimate of tool wear in turning operationWear, 2005
- Computer Simulation of Orthogonal Cutting using a Tool with Multiple CoatingsMachining Science and Technology, 2004
- Estimation of tool wear in orthogonal cutting using the finite element analysisJournal of Materials Processing Technology, 2004
- A finite element analysis of orthogonal machining using different tool edge geometriesJournal of Materials Processing Technology, 2004
- Temperature measurement in single point turningJournal of Materials Processing Technology, 2001
- 2D-FEM SIMULATION OF THE ORTHOGONAL HIGH SPEED CUTTING PROCESSMachining Science and Technology, 2001
- Thermal Contact Conductance1996
- Modelling and simulation of high‐speed machiningInternational Journal for Numerical Methods in Engineering, 1995