High piezoelectricity in low-temperature sintering potassium–sodium niobate-based lead-free ceramics
Author:
- 23 October 2014
- journal article
- research article
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 4 (96) , 53490-53497
Abstract
Here we have realized three goals in a new potassium–sodium niobate material using CuO as sintering aid, such as low temperature sintering, the suppression in the loss of alkali metals, and attaining a high d33. Low-temperature sintered 0.96(K0.46Na0.54)Nb0.95Sb0.05O3–0.04Bi0.5(Na0.82K0.18)0.5ZrO3 ceramics were made conducting by adding CuO using an ordinary ceramic fabrication technique. The sintering temperatures drop from 1095 °C to 950 °C when the CuO content is increased from 0 to 2.5 wt%, and the K and Na loss could be also prevented under a low processing temperature. In addition, the ceramics undergo a phase transition with increasing CuO content, such as from a rhombohedral–tetragonal phase coexistence to the mixture of both rhombohedral–orthorhombic and orthorhombic–tetragonal phase boundaries. The inhomogeneous Cu2+ distributions become more obvious as the CuO content rises, i.e., the excess Cu2+ aggregates at the small grains region for a low CuO content (x ≤ 1.5), and at the small and large grains zones for x = 2.5. The dielectric constant gradually decreases as the CuO increases, and the dielectric loss is lowered by adding CuO content. A well polarization vs. electric field (P–E) loop is seen in the ceramics with x ≤ 2.5, and those with x = 2.5 possess a high d33 of 310 pC N−1 even if the sintering temperatures drop down to 950 °C. As a result, it is an efficient way to promote the piezoelectricity of copper oxide-modified alkaline niobate ceramics using a low-temperature sintering technique.Keywords
This publication has 50 references indexed in Scilit:
- Lead-free Piezoelectrics Based on Potassium–Sodium Niobate with Giant d33ACS Applied Materials & Interfaces, 2013
- Giant d33 in (K,Na)(Nb,Sb)O3-(Bi,Na,K, Li)ZrO3 based lead-free piezoelectrics with high TcApplied Physics Letters, 2013
- Large size lead-free (Na,K)(Nb,Ta)O3 piezoelectric single crystal: growth and full tensor propertiesCrystEngComm, 2013
- Effect of CuO on dielectric and piezoelectric properties of (K0.4425Na0.52Li0.0375)(Nb0.87Ta0.06Sb0.07)O3 ceramicsJournal of Alloys and Compounds, 2012
- Effect of CuO on the Sintering and Piezoelectric Properties of 0.95(Na0.5K0.5)NbO3–0.05SrTiO3Lead‐Free Piezoelectric CeramicsJournal of the American Ceramic Society, 2008
- Microstructure and piezoelectric properties of the CuO-added (Na0.5K0.5)(Nb0.97Sb0.03)O3 lead-free piezoelectric ceramicsJournal of Applied Physics, 2008
- Influence of CuO on the Structure and Piezoelectric Properties of the Alkaline Niobate‐Based Lead‐Free CeramicsJournal of the American Ceramic Society, 2007
- Effect of Li Substitution on the Piezoelectric Properties of Potassium Sodium Niobate CeramicsJapanese Journal of Applied Physics, 2005
- Piezoelectric properties of (K0.5Na0.5)(Nb1−xTax)O3−K5.4CuTa10O29 ceramicsJournal of Applied Physics, 2005
- On activated sintering and electrical properties of NaKNbO3Materials Research Bulletin, 1975