Design and Implementation of a Wireless Charging-Based Cardiac Monitoring System Focused on Temperature Reduction and Robust Power Transfer Efficiency
Open Access
Abstract
Wireless power transfer systems are increasingly used as a means of charging implantable medical devices. However, the heat or thermal radiation from the wireless power transfer system can be harmful to biological tissue. In this research, we designed and implemented a wireless power transfer system-based implantable medical device with low thermal radiation, achieving 44.5% coil-to-coil efficiency. To suppress thermal radiation from the transmitting coil during charging, we minimized the ESR value of the transmitting coil. To increase power transfer efficiency, a ferrite film was applied on the receiving part. Based on analyses, we fabricated a cardiac monitoring system with dimensions of 17 × 24 × 8 mm3 and implanted it in a rat. We confirmed that the temperature of the wireless charging device increased by only 2 °C during the 70 min charging, which makes it safe enough to use as an implantable medical device charging system.Keywords
Funding Information
- National Research Foundation of Korea (2017R1A5A1015596, 2017R1A1A1A05001350)
This publication has 25 references indexed in Scilit:
- Wireless Power Transfer Charging System for AIMDs and PacemakersIEEE Transactions on Microwave Theory and Techniques, 2016
- Resonant Inductive Link for Remote Powering of PacemakersIEEE Transactions on Microwave Theory and Techniques, 2015
- Generation of Magnetic Propulsion Force and Torque for Microrobot Using Wireless Power Transfer CoilIEEE Transactions on Magnetics, 2015
- Magnetic resonant wireless power transfer for propulsion of implantable micro-robotJournal of Applied Physics, 2015
- Design and Characterization of Wireless Power Links for Brain–Machine Interface ApplicationsIEEE Transactions on Power Electronics, 2014
- A 13.56 MHz 40 mW CMOS High-Efficiency Inductive Link Power Supply Utilizing On-Chip Delay-Compensated Voltage Doubler Rectifier and Multiple LDOs for Implantable Medical DevicesIEEE Journal of Solid-State Circuits, 2014
- Soft Microfluidic Assemblies of Sensors, Circuits, and Radios for the SkinScience, 2014
- Implantable Devices: Issues and ChallengesElectronics, 2012
- Analysis and design considerations for a contactless power transfer system2011
- Modeling and Optimization of Printed Spiral Coils in Air, Saline, and Muscle Tissue EnvironmentsIEEE Transactions on Biomedical Circuits and Systems, 2009