Thermal Modelling Utilizing Multiple Experimentally Measurable Parameters
Open Access
Abstract
This paper presents three equivalent thermal circuit models with multiple input parameters, namely, the state of health (SOH), state of charge (SOC), current and temperature. Typical physiochemical models include parameters such as porosity and tortuosity, which are not easily experimentally available; this model allows for model parameters such as the internal impedance to be easily estimated using more practical inputs. The paper models the internal impedance resistance of a LiFePO4 battery at five different ambient temperatures (5, 15, 25, 35, 45 °C), at three different discharge rates (1C, 2C, 3C) and at three different SOHs (90%, 83%, 65%). The internal impedance surface fit experimental measurements with a Pearson coefficient of 0.945. Three thermal models were then created that implemented the internal resistance model. The first two thermal models were 0D models that did not include the influence of the thermal conductivity of the battery. The first model assumed simple heating through internal resistance and convection energy loss, while the second also included the Bernardi Reversible heat term. The final third model was a 2D model that included all previous heat source terms as well as tab heating. The 2D model was solved using a simple Euler method and finite center difference. The R2 values for the 0D thermal models were 0.9964 and 0.9962 for the simple internal resistance and reversible heating models, respectively. The R2 value for the 2D thermal model was 0.996.Keywords
This publication has 17 references indexed in Scilit:
- Active cooling based battery thermal management using composite phase change materialsEnergy Procedia, 2019
- A Reduced-Order Multi-Scale, Multi-Dimensional Model for Performance Prediction of Large-Format Li-Ion CellsJournal of the Electrochemical Society, 2016
- A critical review of thermal management models and solutions of lithium-ion batteries for the development of pure electric vehiclesRenewable and Sustainable Energy Reviews, 2016
- A comparison of model order reduction techniques for electrochemical characterization of Lithium-ion batteries2015
- Model Order Reduction of Electrochemical Batteries Using Galerkin Method2015
- Reduced-Order Electrochemical Model Parameters Identification and SOC Estimation for Healthy and Aged Li-Ion Batteries Part I: Parameterization Model Development for Healthy BatteriesIEEE Journal of Emerging and Selected Topics in Power Electronics, 2014
- Experimental investigation on the feasibility of heat pipe cooling for HEV/EV lithium-ion batteryApplied Thermal Engineering, 2014
- A comparative study of equivalent circuit models for Li-ion batteriesJournal of Power Sources, 2012
- Characterization of high-power lithium-ion batteries by electrochemical impedance spectroscopy. II: ModellingJournal of Power Sources, 2011
- From Li-ion single cell model to battery pack simulation2008