Effect of Ni2+ Content on Lithium/Nickel Disorder for Ni-Rich Cathode Materials
Authors:
- 7 April 2015
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 7 (14) , 7702-7708
Abstract
Li excess LiNi0.8Co0.1Mn0.1O2 was produced by sintering the Ni0.8Co0.1Mn0.1(OH)2 precursor with different amounts of a lithium source. X-ray photoelectron spectroscopy confirmed that a greater excess of Li+ leads to an increase in the number of Ni2+ ions. Interestingly, the level of Li+/Ni2+ disordering decreases with an increase in Ni2+ content determined by the I003/I104 ratio in the X-ray diffraction patterns. The electrochemical measurement shows that the cycling stability and rate capability improve with an increase in Ni2+ content. After cycling, electrochemical impedance spectroscopy shows decreased charge transfer resistance, and the XRD patterns exhibit an increased I003/I104 ratio with an increase in Ni2+ content, reflecting the decrease in the level of Li+/Ni2+ disorder during cycling.Keywords
Funding Information
- Program for New Century Excellent Talents in University (NCET-13–0044)
- Ministry of Science and Technology of the People's Republic of China (2015CB251100)
- Beijing Institute of Technology (2013CX01003)
- National Natural Science Foundation of China (51202083, 51472032)
- Beijing Science and Technology Committee (Z131100003413001)
- Beijing Municipality
This publication has 30 references indexed in Scilit:
- Effects of inorganic salts on the morphological, structural, and electrochemical properties of prepared nickel-rich Li[Ni0.6Co0.2Mn0.2]O2Journal of Power Sources, 2014
- A New Type of Protective Surface Layer for High-Capacity Ni-Based Cathode Materials: Nanoscaled Surface Pillaring LayerNano Letters, 2013
- Challenges Facing Lithium Batteries and Electrical Double‐Layer CapacitorsAngewandte Chemie International Edition, 2012
- Lithium Nickel Cobalt Manganese Oxide Synthesized Using Alkali Chloride Flux: Morphology and Performance As a Cathode Material for Lithium Ion BatteriesACS Applied Materials & Interfaces, 2012
- Electrical Energy Storage for the Grid: A Battery of ChoicesScience, 2011
- Spinel‐Layered Core‐Shell Cathode Materials for Li‐Ion BatteriesAdvanced Energy Materials, 2011
- A Novel Cathode Material with a Concentration‐Gradient for High‐Energy and Safe Lithium‐Ion BatteriesAdvanced Functional Materials, 2010
- Challenges for Rechargeable Li BatteriesChemistry of Materials, 2009
- Nanostructured electrode materials for electrochemical energy storage and conversionEnergy & Environmental Science, 2008
- Building better batteriesNature, 2008