Composition and Distribution Characteristics of Volatile Products from the Rapid Pyrolysis of Refinery Water Treatment Sludge
Open Access
- 27 September 2026
- Vol. 14 (19) , 3095
Abstract
Refinery water treatment sludge (RWTS) is a hazardous organic waste that requires effective treatment prior to disposal, yet its resource potential remains underexplored. In this work, the physicochemical properties and pyrolysis product distribution of RWTS collected from a refinery in Xinjiang, China, were systematically investigated using Fourier transform infrared (FTIR), thermogravimetric and derivative thermogravimetric (TG-DTG) analysis, and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). Proximate analysis revealed a high volatile matter content (64.69%), while ultimate analysis showed a carbon content of 49.18% and an H/C molar ratio of 1.80, indicating that RWTS is a hydrocarbon-rich feedstock. FTIR analysis demonstrated that aliphatic C-H groups dominate the organic structure, while aromatic C=C and oxygen-containing functional groups are present in minor proportions. TG-DTG profiles revealed three distinct decomposition stages, with maximum weight-loss rates at 305, 445, and 655 °C, corresponding to the staged release of volatile compounds and the progressive cleavage of organic structures. Py-GC/MS analysis further showed a pronounced temperature dependence of the pyrolysis products. At 305 °C and 445 °C, the products were mainly alkanes, with relative contents of 84.9% and 89.1%, respectively, mainly distributed in the C11–C30 carbon-number range. In contrast, at 655 °C, extensive thermal cracking of long-chain aliphatic hydrocarbons generated large amounts of light hydrocarbons (C4–C10, 42.20%) and alkenes (56.0%), accompanied by the formation of monocyclic aromatic hydrocarbons. Results demonstrate that increasing the pyrolysis temperature shifts the dominant conversion pathway from the volatilization of indigenous hydrocarbons to the thermal cracking of long-chain aliphatic structures, providing new insights into the thermal conversion mechanism and resource utilization of RWTS.Keywords
Funding Information
- Xinjiang Uygur Autonomous Region (2025D14013)
- Yili Prefecture (YJC2025B11)
- Xinjiang Production and Construction Corps (2025GG015)
This publication has 38 references indexed in Scilit:
- Impacts of drying treatment on pyrolysis of oily sludge: Kinetic analysis and product evaluationChinese Journal of Chemical Engineering, 2026
- Petroleum sludge formation and its treatment methodologies: a reviewEnvironmental Science and Pollution Research, 2024
- Products distribution and heavy metals migration during catalytic pyrolysis of refinery oily sludgeEnergy Reports, 2023
- Products distribution and hazardous elements migration during pyrolysis of oily sludge from the oil refining processChemosphere, 2022
- Petroleum oil and products recovery from oily sludge: Characterization and analysis of pyrolysis productsEnvironmental Research, 2021
- Pyrolysis performance and kinetic analysis of oily sludgeJournal of Thermal Analysis and Calorimetry, 2021
- Effect of lime mud on the reaction kinetics and thermodynamics of biomass pyrolysisBioresource Technology, 2020
- Distribution and chemical structure characteristic of the fast thermal-cracking products of Buton oil sand bitumen by Py–GC/TOF–MS and a fluidized bed reactorEnergy Conversion and Management, 2019
- Geochemistry and mineralogy of coal in the recently explored Zhundong large coal field in the Junggar basin, Xinjiang province, ChinaInternational Journal of Coal Geology, 2010
- Kinetic parameters from thermogravimetric data. II.Journal of Polymer Science Part B: Polymer Letters, 1965