Highly Selective Reconfigurable Filter for UWB Systems
Authors:
- 15 January 2014
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Microwave and Wireless Components Letters
- Vol. 24 (3) , 146-148
Abstract
A novel highly selective compact reconfigurable filter with a switchable notched band for ultrawideband (UWB) systems is presented. The proposed filter exhibits two distinct features by altering switching device such as PIN diode (BAP65-02) in this case. First, a switchable notched band is generated which facilitates a rejection at 3.5 GHz to avoid interferences from the WiMAX systems. Later, a reconfigurable filter is developed which changes from bandpass to bandstop at the same UWB (3.1-5.2 GHz) spectrum. The filter shows very low pass-band insertion loss and five transmission zeros are created between passband edges to enhance the signal selectivity and broad rejection at the stopband. A filter sample is fabricated to provide an experimental verification on the proposed filter. The proposed filter is able to achieve significant size reduction as compared to an conventional reconfigurable filters and bandpass filters with notched band.Keywords
This publication has 4 references indexed in Scilit:
- Highly linear microstrip wideband bandpass filter with switchable notched band for wireless applicationsMicrowave and Optical Technology Letters, 2013
- Miniaturized reconfigurable and switchable filter from UWB to 2.4 GHz WLAN using PIN diodes2009
- Switchable Embedded Notch Structure for UWB Bandpass FilterIEEE Microwave and Wireless Components Letters, 2008
- Implementation of Compact UWB Bandpass Filter With a Notch-BandIEEE Microwave and Wireless Components Letters, 2008