Determination of Long-Term Creep Properties for 316H Steel Using Short-Term Tests on Pre-strained Material
Authors:
Open Access
- 7 January 2021
- journal article
- research article
- Published by Springer Nature in Experimental Techniques
- Vol. 45 (4) , 549-560
Abstract
Determination of long-term creep rupture properties for 316H steel is both costly and time-consuming and given the level of scatter in the data would need substantial number of tests to be performed. The primary objective of this study is to estimate the long-term creep properties of cross-weld (XW) and as-received (AR) 316H stainless steel by performing accelerated tests on pre-compressed (PC) material. In this work, uniaxial creep rupture tests have been performed on XW specimens and the results have been used to establish a correlation with accelerated test results on the PC material. Moreover, tensile tests have been performed on XW specimens at room temperature and 550 °C to examine the pre-conditioning effects on the mechanical response of the material. Similar power-law creep properties have been found for the creep strain rate and rupture time behaviour of the XW and PC specimens. It also has been found that the creep ductility data points obtained from XW and PC specimens fall upon the estimated trend for the AR material at 550 °C when the data are correlated with the applied stress normalised by 0.2% proof stress. The results show that the long-term creep properties of the XW and AR material can be estimated in much shorter time scales simply by performing tests on the PC material state.Keywords
This publication has 21 references indexed in Scilit:
- The effect of creep strain rate on damage accumulation in Type 316H austenitic stainless steelInternational Journal of Pressure Vessels and Piping, 2018
- Graded Creep Deformation Properties of 316H Welds and its Impact on Creep2018
- Measurement of Creep Deformation across Welds in 316H Stainless Steel Using Digital Image CorrelationExperimental Mechanics, 2016
- Critical analysis of the prediction of stress relaxation from forward creep of Type 316H austenitic stainless steelMaterials & Design, 2016
- Generation of intergranular strains during high temperature creep fatigue loading of 316H stainless steelMaterials at High Temperatures, 2014
- Failure of a welded pressure vessel due to creep: damage initiation, evolution and reheat crackingPhilosophical Magazine, 2007
- Creep crack growth behaviour of Type 316H steels and proposed modifications to standard testing and analysis methodsInternational Journal of Pressure Vessels and Piping, 2007
- Factors affecting reheat cracking in the HAZ of austenitic steel weldmentsInternational Journal of Pressure Vessels and Piping, 2003
- Constitutive equations for time independent plasticity and creep of 316 stainless steel at 550°CInternational Journal of Pressure Vessels and Piping, 2003
- Measurement and prediction of residual stresses in thick-section steel weldsThe Journal of Strain Analysis for Engineering Design, 2000