Abstract
This paper presents the design and evaluation of a Software-Defined Radio (SDR) testbed suitable for studying RF signal propagation and fingerprint s haping a cross multiple sensors and frequency bands. The system consists of four receiver nodes, each based on a Raspberry Pi 4 and an ADALM-Pluto SDR, along with a central transmitter. All nodes are coordinated through a modular architecture and managed using GNU Radio. This setup enables OFDM-based signal transmission and precise RSSI measurement via custom Python processing. Experiments were conducted across four frequency bands-2.5, 2.9, 3.2, and 3.7 GHz -under various spatial configurations. A key finding is the system's ability to consistently recover RSSI-based spatial fingerprints a cross a ll f requencies, demonstrating its suitability for generating Radio Frequency Patterns (RFPs) for applications such as subscriber positioning and hardware identification through pattern recognition. Additionally, the results reveal frequency-dependent channel attenuation and antenna-specific behaviors, providing valuable insights into the practical use of RFPs in real-world wireless environments.