Void stability process window and parametric optimization for filament‐wound composite riser
Authors:
- 23 January 2024
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 45 (6) , 5590-5606
Abstract
The manufacturing process parameters play a critical role in determining the quality of resin‐matrix composite structures. This study aims to investigate the impact of process parameters on void content and identify the stable and minimal void content of nano‐reinforced filament‐wound risers. Fourteen process parameters were initially designed, taking into account winding tension, speed, and curing time, based on the Box–Behnken design method. Subsequently, a void content model was developed using the response surface method, utilizing experimental data. The study further explores the effects of individual and combined process parameters on void content and establishes a stable process window through sensitivity analysis. Finally, the PSO‐GWO algorithm is employed to optimize winding tension, speed, and curing time with the objective of reducing void content. The results of the numerical analysis highlight the significant influence of curing time on void content, and the optimal parametric combination is determined to be 48.4 N winding tension, 12.6 m/min winding speed, and 6.7 h of curing time.Highlights: Winding tension and rate have a similar impact on porosity content. Void content sensitivity to tension is affected by feed rate and curing time. The stable process windows are winding tension [28 N, 53 N], feed rate [30%, 78%], and curing time [5.1 h, 8.4 h]. The optimal parameters combination is 48.4 N, 63%, and 6.7 h.Keywords
Funding Information
- Natural Science Foundation of Jiangsu Province (BK20200999)
- Jiangsu University of Science and Technology (1022931904)
This publication has 26 references indexed in Scilit:
- Multi-response optimization of T300/epoxy prepreg tape-wound cylinder by grey relational analysis coupled with the response surface methodMaterials Research Express, 2017
- Effect of surface properties of polysulfone support on the performance of thin film composite polyamide reverse osmosis membranesJournal of Applied Polymer Science, 2016
- Void content and interfacial properties of composite laminates under different autoclave cure pressureComposite Interfaces, 2016
- The voids formation mechanisms and their effects on the mechanical properties of flax fiber reinforced epoxy compositesComposites Part A: Applied Science and Manufacturing, 2015
- Cure behaviour and void development within rapidly cured out-of-autoclave compositesComposites Part B: Engineering, 2013
- Effects of variation in autoclave pressure, temperature, and vacuum-application time on porosity and mechanical properties of a carbon fiber/epoxy compositeJournal of Composite Materials, 2011
- RETRACTED: Parametric sensitivity analysis of PEM fuel cell electrochemical ModelInternational Journal of Hydrogen Energy, 2011
- Local and global sensitivity analysis of a tractor and single axle grain cart dynamic system modelBiosystems Engineering, 2010
- Effects of vacuum and pressure in an autoclave curing process for a thermosetting fibre-reinforced compositeJournal of Materials Processing Technology, 1990
- Curing of Epoxy Matrix CompositesJournal of Composite Materials, 1983