Abstract
This study presents the synthesis of microporous polystyrene particles and the potential use of these materials in CO2 capture for biogas purification. Highly cross-linked polystyrene particles are synthesized by the emulsion copolymerization of styrene (St) and divinylbenzene (DVB) in water. The cross-link density of the polymer is varied by altering the St/DVB molar ratio. The size and the morphology of the particles are characterized by scanning and transmission electron microscopy. Following supercritical point drying with carbon dioxide or lyophilization from benzene, the polystyrene nanoparticles exhibit a significant surface area and permanent microporosity. The dried particles comprising 35 mol % St and 65 mol % DVB possess the largest surface area, ∼205 m2/g measured by Brunauer–Emmett–Teller and ∼185 m2/g measured by the Dubinin–Radushkevich method, and a total pore volume of 1.10 cm3/g. Low pressure measurements suggest that the microporous polystyrene particles exhibit a good separation performance of CO2 over CH4, with separation factors in the range of ∼7–13 (268 K, CO2/CH4 = 5/95 gas mixture), which renders them attractive candidates for use in gas separation processes.

This publication has 38 references indexed in Scilit: