Evaluation of Interfacial Properties of Fiber‐Reinforced Ceramic Composites Using a Mechanical Properties Microprobe
Author:
- 1 December 1993
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 76 (12) , 3041-3050
Abstract
The application of a mechanical properties microprobe to evaluate the interfacial properties of fiber‐reinforced ceramic composites is addressed. The stress–displacement relation of the embedded fiber, which is subjected to an axial loading–unloading cycle, is analyzed. The interfacial bonding, Coulomb friction at the debonded interface, Poisson's effect of the loaded fiber, and residual stresses are included in the analysis, and closed‐form analytical solutions are obtained. Based on the analytical solutions, a methodology is established to extract the interfacial properties from experimental stress–displacement curves. The roles of interfacial bonding, Poisson's effect, and residual axial stresses on the residual fiber displacement after complete unloading are also addressed in the present study.Keywords
This publication has 34 references indexed in Scilit:
- Tensile fracture of fiber-reinforced composites: Influence of thermal residual effectComposites Engineering, 1993
- Evaluations of residual axial stresses and interfacial friction in Nicalon fibre-reinforced macro-defect-free cement compositesJournal of Materials Science, 1993
- Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites Part VI. Interpretation of fiber pull-out curvesMaterials Science and Engineering: A, 1991
- Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites IV: sliding due to residual stressesMaterials Science and Engineering: A, 1991
- Interfacial debonding and fiber pull-out stresses of fiber-reinforced composites III: With residual radial and axial stressesMaterials Science and Engineering: A, 1991
- Interfacial debonding and fiber pull-out stresses of fiber-reinforced compositesMaterials Science and Engineering: A, 1990
- Elastic load transfer from partially embedded axially loaded fibre to matrixJournal of Materials Science Letters, 1988
- Fibre-matrix bond strength studies of glass, ceramic, and metal matrix compositesJournal of Materials Science, 1988
- Failure of fibre-reinforced composites by pull-out fractureJournal of Materials Science, 1986
- Measurement of Hardness at Indentation Depths as Low as 20 Nanometres1985